1. Motors For Automation Drives Motion Control Sale
  2. sku: 21009245924479771
  3. SANYO DENKI R2AA06040FCP00M6

SANYO DENKI R2AA06040FCP00M6 Servo Motor Amat 0190-64456

R2aa06040fcp00m6 Sanyo Denki Servo Motor Amat 0190-64456 Working Surplus

( Brand: Sanyo Denki ), ( Manufacturer Part Number: R2AA06040FCP00M6 ), ( Part Type: Servo Motor ), ( Category: Automation Motion Control And Robotics ), ( Amat Applied Materials Part No: 0190-64456 )

Review SANYO DENKI Servo Motor Amat Working Surplus

The **Sanyo Denki R2AA06040FCP00M6** is a high-performance, precision-engineered servo motor designed for demanding industrial applications where reliability, efficiency, and compact form factor are critical. Part of Sanyo Denki s **AMAT (Automation & Motion Technology)** series, this motor is engineered to deliver exceptional torque output and smooth, precise motion control, making it an ideal choice for automated manufacturing, robotics, packaging machinery, and CNC systems. With a **60mm frame size**, it strikes a balance between space efficiency and power, allowing for integration into tight installation spaces without compromising performance. The motor features a **permanent magnet synchronous (PMS) design**, ensuring high torque density and minimal energy loss, which translates to improved operational efficiency and reduced heat generation during prolonged use.

Built with **high-grade materials**, including a robust stainless steel housing and corrosion-resistant coatings, the R2AA06040FCP00M6 is engineered for durability in harsh environments, including those exposed to dust, moisture, and temperature fluctuations. Its **IP65-rated enclosure** provides excellent protection against solid particles and low-pressure water jets, making it suitable for cleanroom applications and outdoor industrial settings. The motor s **bearing system** incorporates precision ball bearings and sealed shaft options, reducing friction and extending the lifespan of the unit while maintaining smooth, vibration-free operation. For enhanced reliability, it is equipped with **thermal protection circuitry**, automatically shutting down in the event of overheating to prevent damage to the motor or connected systems.

This servo motor is compatible with a wide range of **Sanyo Denki s servo drives and controllers**, such as the **SDR series**, enabling seamless integration into advanced motion control systems. Its **encoder feedback system** provides high-resolution position data, typically offering **17-bit resolution (131,072 pulses per revolution)**, which ensures sub-micron-level accuracy in positioning tasks. The motor s **brushless DC design** eliminates the wear associated with commutator-based systems, reducing maintenance requirements and increasing uptime. Additionally, its **low inertia rotor** allows for rapid acceleration and deceleration, making it well-suited for applications requiring dynamic motion profiles, such as pick-and-place systems or high-speed indexing.

For customization and flexibility, the R2AA06040FCP00M6 can be paired with various **gearheads and couplings**, including **harmonic drive reducers** or **planetary gearboxes**, to match specific torque and speed requirements. The motor s **flange mounting options** (e.g., NEMA 23-compatible or custom flanges) ensure compatibility with existing machinery, while its **cable exit options** (e.g., side or rear) simplify wiring and installation. Whether deployed in **automated assembly lines, medical devices, or precision testing equipment**, this servo motor delivers consistent performance under heavy loads, making it a versatile solution for industries where precision and dependability are non-negotiable. With its blend of **high efficiency, compact design, and robust construction**, the Sanyo Denki R2AA06040FCP00M6 stands as a premium choice for engineers and manufacturers seeking a reliable servo motor for their automation needs.

**Pros and Cons of buying a Sanyo Denki R2AA06040FCP00M6 Servo Motor (AMAT 0190-64456)**

### **Pros**

1. **High Precision and Performance** This servo motor is designed for industrial applications, offering smooth motion control, low backlash, and high torque output. It is suitable for tasks requiring precise positioning, such as CNC machines, robotics, or automated assembly lines.

2. **Durability and Reliability** Sanyo Denki is a well-established manufacturer known for producing robust servo motors with long operational lifespans. The motor is built to withstand continuous use in demanding environments, reducing the need for frequent replacements.

3. **Compatibility with Industrial Systems** The motor is part of Sanyo Denki s AMAT series, which is widely used in automation and manufacturing. It integrates seamlessly with their controllers and drives, ensuring compatibility with existing setups.

4. **Energy Efficiency** Modern servo motors like this one are designed to minimize energy consumption while maintaining high performance. They often feature regenerative braking and optimized motor windings to reduce power waste.

5. **Maintenance-Free Operation** Many industrial servo motors, including this model, require minimal maintenance. Features like sealed bearings and enclosed housings reduce wear and tear from dust, debris, or moisture.

6. **Wide Availability of Spare Parts** As a legacy or widely used model, replacement parts, controllers, and accessories are likely still available through distributors or aftermarket suppliers.

7. **Proven Track Record** Sanyo Denki has a history of producing high-quality servo motors used in various industries, including automotive, packaging, and textile manufacturing. This model benefits from decades of refinement.

---

### **Cons**

1. **Potential Obsolescence** This motor may be an older model, meaning newer technologies (e.g., brushless DC, advanced feedback systems, or digital communication protocols like EtherCAT or SERCOS) may not be incorporated. Upgrading to a newer servo could offer better efficiency, diagnostics, and integration options.

2. **Limited Modern Features** Older servo motors may lack features such as built-in diagnostics, remote monitoring, or compatibility with advanced control systems (e.g., PLCs with Ethernet/IP or Profibus). This could require additional hardware for full automation integration.

3. **Higher Initial Cost Relative to Newer Alternatives** While the motor itself may be affordable, the cost of compatible controllers, drives, and programming tools could be higher than newer, more integrated servo systems. Newer motors often bundle these components more efficiently.

4. **Dependence on Legacy Support** If Sanyo Denki has discontinued this specific model, finding authorized service or replacement parts may become difficult over time. Aftermarket parts might not guarantee the same quality or longevity.

5. **Lower Energy Efficiency Compared to Modern Motors** Newer servo motors often incorporate permanent magnet technologies (e.g., rare-earth magnets) and advanced control algorithms that improve efficiency by 10 30% compared to older designs.

6. **Potential Compatibility Issues with Newer Systems** If integrating this motor into a modern automation setup (e.g., a PLC with digital communication), additional converters or adapters may be required, adding complexity and cost.

7. **Limited Customization Options** Unlike newer servo motors, which may offer adjustable parameters (e.g., torque constants, resolution, or communication protocols), this model may have fixed specifications, limiting flexibility for specific applications.

---

### **Conclusion**

The **Sanyo Denki R2AA06040FCP00M6** is a reliable, high-performance servo motor well-suited for industrial applications where precision, durability, and compatibility with legacy systems are priorities. It excels in environments where maintenance is minimal and the motor s proven track record justifies its use. However, its age may limit its efficiency, modern features, and long-term support compared to newer alternatives.

If your application requires **high precision in a stable, low-maintenance setup** and you have access to compatible controllers or can source spare parts easily, this motor remains a solid choice. Conversely, if you are working on a **modern automation project** with demands for energy efficiency, digital integration, or advanced diagnostics, investing in a newer servo motor (e.g., from brands like Yaskawa, ABB, or Bosch Rexroth) may offer better long-term benefits.

---

### **Recommendation**

- **Buy if:**

- You are maintaining or upgrading an existing system that already uses Sanyo Denki components.

- Your application does not require cutting-edge features like high-resolution feedback or digital communication.

- You can source spare parts and controllers reliably.

- Cost-effectiveness and longevity are prioritized over the latest technological advancements.

- **Avoid if:**

- You are starting a new automation project with modern PLCs or digital communication requirements.

- Energy efficiency or reduced operational costs are critical factors.

- You anticipate needing advanced diagnostics or remote monitoring capabilities.

- The motor s age may lead to difficulty finding support or replacements in the future.

For **new installations or future-proofing**, consider evaluating newer servo motors with **higher efficiency, digital interfaces, and better integration options**. However, if this motor fits seamlessly into your current workflow, it remains a dependable option. Always verify compatibility with your specific controller and application requirements before purchasing.

Details:

Sale Details. Pictured test equipment is not included or available for sale. AMAT Applied Materials Part No: 0190-64456This is used working surplus. Item condition: Used Working, 90 Day Warranty.

Model No: SANMOTION R. Only items pictured are included: If a part is not pictured, or mentioned above, then it included in the sale. The physical condition is good, but there are signs of previous use and handling. Part No: R2AA06040FCP00M6.

Serial numbers or country of manufacture may vary. Sanyo Denki R2AA06040FCP00M6 Servo Motor AMAT 0190-64456 Working Surplus.

part #: r2aa06040fcp00m6 price

  • $803.26

specifications oelemot:

  • brand: Sanyo Denki
  • mpn: R2aa06040fcp00m6
  • part type: Servo Motor
  • category: Automation Motion Control And Robotics
  • amat applied materials part no: 0190-64456

returns oelemot:

  • paid by: Buyer
  • policy: Returns Accepted
  • time: 60 Days
  • method: Money back

shipping oelemot:

  • service: FedEx Ground / FedEx Home Delivery
  • class: Standard
  • transit: 4-8 Days
  • carrier: FedEx
  • type: Calculated
  • cost: $0.00

offer oelemot:

  • started: March 19, 2026
  • availability: In Stock
  • quantity: 1
  • options: Ship-to-home
  • sold: 0
  • best offers: True

seller oelemot:

  • city: Albuquerque, New Mexico
  • rating: 99.8%
  • # reviews: 10233

general oelemot:

  • condition: Used
  • Industrial Automation Motion Controls > Electric Motors > General Purpose Motors

payments oelemot:

  • credit card: Visa
  • wallet: Google-pay
  • other
part type: servo motor, category: automation motion control and robotics, amat applied materials part no: 0190-64456,
category: business & industrial > industrial automation motion controls > electric > general purpose, sku: 21009245924479771,
Sanyo Denki R2AA06040FCP00M6 Is Similar To:
oelemot logo
1 offer $803.26 USD
  • Used. Offer #1 priced at $803.26 + $0.00 shipping estimate = $803.26* total. The physical condition is good, but there are signs of previous use and handling. Part No: .FREE SHIPPING

Copyright © oelemot.com