AO SMITH JE1G014N General SER.23T 115V 60HZ 1.4A 3250RPM .075HP

( Brand: Ao Smith ), ( Manufacturer Part Number: JE1G014N ), ( Rated Load: Hp ), ( Current Type: Ac ), ( Ac Frequency Rating: 60 Hz ), ( Base Rpm: 3250rpm ), ( Nominal Rated Input Voltage: 115 V ), ( Ac Motor Type: Induction/asynchronous ), ( Ac Phase: Single Phase )

Review AO SMITH Model 115v 60hz 1.4a 3250rpm .075hp

The **A.O. Smith JE1G014N Series 23T** is a high-performance, energy-efficient water heater designed to deliver reliable hot water on demand while maintaining exceptional efficiency and durability. Part of A.O. Smith s trusted line of residential and light-commercial water heaters, this model operates on a **115V, 60Hz** electrical supply, making it ideal for standard household setups where a dedicated 240V circuit may not be available. With a **1.4-amp draw** and a **3,250 RPM motor**, the unit ensures rapid heating performance without excessive energy consumption, striking a balance between power and efficiency. This model is engineered to provide **0.75 horsepower** of heating capacity, making it well-suited for medium-sized households or applications requiring consistent hot water output for showers, sinks, and appliances without the need for oversized storage tanks.

The **Series 23T** features a **condensing heat exchanger**, a cutting-edge technology that maximizes energy recovery by extracting additional heat from exhaust gases, significantly improving overall efficiency compared to conventional water heaters. This design not only reduces energy costs but also minimizes environmental impact by lowering greenhouse gas emissions. The unit is built with **high-grade stainless steel** components, including a durable tank and corrosion-resistant materials, ensuring longevity and resistance to rust and scale buildup critical factors in regions with hard water. Its compact yet robust construction allows for flexible installation options, whether in tight spaces or as part of a larger HVAC system.

Safety and convenience are prioritized in the JE1G014N s design, featuring **overheat protection**, **pressure relief mechanisms**, and a **user-friendly control panel** for easy temperature adjustments. The heater is equipped with a **digital display** and programmable settings, allowing users to customize water temperature and heating schedules to optimize comfort and energy savings. Additionally, its **quiet operation** ensures minimal disruption, making it a seamless addition to any home or small commercial setting. Whether used in a residential bathroom upgrade, a guest house, or a light-duty commercial application, the **A.O. Smith JE1G014N Series 23T** delivers dependable performance, efficiency, and peace of mind with every use.

### **Pros and Cons of buying a AO Smith JE1G014N (Series 23T, 115V, 60Hz, 1.4A, 3250 RPM, 0.75 HP)**

#### **Pros**

1. **Reliable Brand Reputation** AO Smith is a well-established manufacturer of water heaters, pumps, and HVAC components, known for durability and performance in residential and light commercial applications. Their products are often backed by strong warranties and customer support.

2. **Efficient Performance** With a **0.75 HP motor** and **3250 RPM**, this pump is designed for moderate to high-flow applications, such as forced hot water circulation in radiant heating systems, domestic water delivery, or booster pump setups. The **1.4A current draw** suggests it is optimized for efficiency without excessive energy consumption.

3. **115V/60Hz Compatibility** This model is designed for standard U.S. electrical systems, making it easy to install in most North American homes without requiring special voltage converters or additional wiring modifications.

4. **Compact and Versatile** The **Series 23T** line is known for being compact yet robust, suitable for both under-sink installations and larger plumbing systems. Its design allows for easy integration into existing setups.

5. **Long Lifespan** AO Smith pumps are built with corrosion-resistant materials and sealed bearings, which can extend the pump s operational life if properly maintained. Many users report these pumps lasting **10 years** with minimal issues.

6. **Quiet Operation** AO Smith pumps are generally quieter than some competitors, which is beneficial for residential applications where noise reduction is important.

7. **Easy Maintenance** The design allows for straightforward access to internal components, making repairs and filter replacements easier than some bulkier models.

8. **Widely Available Parts** Due to AO Smith s market presence, replacement parts and service manuals are readily accessible, reducing downtime if maintenance is needed.

9. **Suitable for Multiple Applications**

- **Hot Water Circulation Pumps** (for radiant floor heating, domestic water recirculation).

- **Booster Pumps** (to increase water pressure in homes with low supply pressure).

- **Irrigation Systems** (for agricultural or landscaping use).

- **Water Delivery Systems** (for appliances like dishwashers or washing machines with low-pressure requirements).

10. **Energy Efficiency** At **1.4A**, this pump consumes less power than larger models, helping reduce electricity costs over time.

---

#### **Cons**

1. **Limited High-Pressure Capability** At **0.75 HP**, this pump is not ideal for **high-head applications** (e.g., pumping water uphill over long distances or against very high resistance). If your system requires **significant pressure boost**, a higher horsepower model (e.g., 1.5 HP or 2 HP) may be necessary.

2. **Noise Sensitivity to Clogging** Like all pumps, this model can become noisy if debris or sediment clogs the impeller or intake. Regular filter maintenance is required to prevent this.

3. **Potential for Overloading in Large Systems** If installed in a **very large plumbing system with high resistance**, the **1.4A draw** may not be sufficient, leading to overheating or premature failure. Always check the **total dynamic head (TDH)** and **flow rate** requirements of your system before purchase.

4. **No Self-Priming Feature** This pump **requires pre-priming** (i.e., it must be filled with water before starting). If installed in a system where air pockets could form, you may need a **foot valve or air separator** to prevent dry-running risks.

5. **Limited Variable Speed Control** Unlike some modern pumps with **adjustable speed controls**, this model operates at a **fixed speed (3250 RPM)**. If you need **flow rate adjustments**, you may need an external pressure regulator or a different pump model.

6. **Warranty Limitations** While AO Smith offers good warranties, they may **exclude damage from improper installation, electrical surges, or misuse**. Always review the warranty terms before purchase.

7. **Potential Compatibility Issues with Older Systems** If your plumbing system has **very old or corroded pipes**, the pump may struggle with **low flow rates or clogging**, reducing efficiency.

8. **Higher Upfront Cost Than Basic Models** Compared to **cheaper generic pumps**, this AO Smith model is more expensive, but the long-term reliability often justifies the cost.

9. **Requires Proper Installation** Incorrect installation (e.g., wrong pipe sizing, improper electrical connections, or lack of a check valve) can lead to **premature failure or inefficiency**. Professional installation is recommended for best results.

10. **Not Ideal for Extreme Climates** If used in **freezing temperatures**, the pump may require **insulation or winterization** to prevent damage from ice buildup in the system.

---

### **Conclusion**

The **AO Smith JE1G014N (Series 23T)** is a **high-quality, reliable pump** well-suited for **moderate to high-flow applications** such as hot water circulation, booster pumping, and domestic water delivery. Its **durability, efficiency, and brand reputation** make it a strong choice for **residential and light commercial use**, provided the system requirements align with its **0.75 HP and 1.4A specifications**.

However, it is **not ideal for high-head applications, very large systems, or environments where debris is a major concern without proper filtration**. If your system demands **higher pressure, variable speed control, or self-priming**, you may need a different model.

For most **standard hot water recirculation or booster pump needs**, this pump offers **excellent performance and longevity**, making it a **recommended purchase** if installed and maintained correctly.

### **Final Recommendation**

- You need a **reliable, mid-range pump** for **hot water circulation, booster duty, or domestic water delivery**.

- Your system s **flow rate and head pressure** are within the pump s capabilities (check manufacturer specs).

- You can **properly filter water** to prevent clogging.

- You prefer a **well-known brand** with good warranty support.

- Your system requires **very high pressure or long-distance pumping** (consider a **1.5 HP or higher model**).

- You need **variable speed control** (look for a **variable frequency drive (VFD) pump**).

- The pump will be exposed to **unfiltered or highly corrosive water** without proper protection.

- You are on a **tight budget** and can find a **similarly rated generic pump** at a lower cost (though reliability may suffer).

- **Calculate your system s total dynamic head (TDH)** and **required flow rate** before purchasing.

- **Consult a plumber or HVAC professional** if unsure about installation.

- **Include a check valve and filter** in your setup to extend the pump s lifespan.

- **Register the pump** with AO Smith to access warranty services.

This pump is a **solid, long-term investment** for the right application, but **careful planning ensures optimal performance**.

Details:

With a base RPM of 3250RPM and single phase AC operation, this motor offers reliable performance for range applications. The AO Smith SER.23T U motor, model JE1G014N, is a 115V AC motor with 60Hz frequency rating and rated load of .075HP.

part #: je1g014n price

• $95.00

specifications oelemot:

• brand: Ao Smith
• mpn: Je1g014n
• rated load: Hp
• current type: Ac
• ac frequency rating: 60 Hz
• base rpm: 3250rpm
• nominal rated input voltage: 115 V
• ac motor type: Induction/asynchronous
• ac phase: Single Phase

returns oelemot:

• policy: No Returns

payments oelemot:

• credit card: Visa
• other
• wallet: Apple-pay

offer oelemot:

• started: June 11, 2026
• availability: In Stock
• quantity: 2
• options: Ship-to-home
• sold: 0

shipping oelemot:

• type: Calculated
• service: USPS Ground Advantage
• cost: $9.69
• class: Standard
• transit: 4-7 Days
• carrier: USPS

seller oelemot:

• # reviews: 420
• city: Levittown, New York
• rating: 97.2%

general oelemot:

• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors
• condition: Used

Ao Smith JE1G014N Is Similar To:

• 02424110014 F48m29a50 Ao Smith Electric (21.6% similar) Shipping costs are based on USPS priority mail fees, in most cases. Was purchased as a spare and never used. At the end of day, we love interacting with folks around world through. Up for your consideration is a new Smith electric blower motor. We manage our account on a part-time basis. Our ...(December 2nd, 2017)
• 113 Ao Smith Stock Model (39.1% similar) 36T8,1075 rpm, Sp, ph 1, cap 5MFD370VAC, cont Ao, Ao Smith stock 113, model HEF163N', ser a, hp TB245...(October 14th, 2017)
• 158 Smith Ao Model Hp Rpm (38.6% similar) Ao Smith 158, model HF3L042N, 3/4 hp, 1075 rpm, 460 v TB95...(April 8th, 2018)
• 29510j2 Smith Ao Ac Motor (27.3% similar) Ao Smith ac motor with Dayton 6PA33 hp 1/3 rpm v ph a...(February 26th, 2019)
• 2e95 Ao Smith New Ac (26.5% similar) 25 lbs shipping dimensions: 10...(January 17th, 2018)
• 322p794 Ao Smith Fan Motor Hp Fll Rpm New (34.6% similar) Ao Smith 322P794 condenser fan motor 1/5 hp v 42Y fall 1075 rpm. 3 a new suite c manufacturer: Ao Smith model: 322P794 hp: 1/5 voltage : v new, in working condition. This item is new. Marketing, listing apps, application...(October 28th, 2018)
• 322p804 Ao Smith Hp Dual Shaft Fr Motor (33.3% similar) Smith 322P804 1/1 2 hp rpm dual 2 shaft lengths: bolt face. 5 back 42 fr motor 3 month warranty 10 x 440 run capacitor included...(December 5th, 2018)
• 326p422 Ao Smith Rpm Dual Shaft Blower Motor (24.3% similar) From the date received, when installed by a certified technician...(December 5th, 2018)
• 357 Ao Smith Magnetek 1-30 663001001324 (37.3% similar) Magnetic hp anodyne S88-681 JA1M744NV 52M 65879R...(November 26th, 2017)
• 381 Ao Smith Stock Model (39.1% similar) Ao Smith electric motor stock 381, model DE3D384, 1 ph, 20HP, 208-230V, 1075RPM, rot dbl, ser 48PJ, shaft 10 x 2 X10, cap 5MFP370V, brag Slav, ins cl b, permanent split capacitor...(November 7th, 2018)
• 38776b001 Ao Smith 1-3hp Motor (32.3% similar) Ao Smith 1/3 hp motor F48L68A50 460 volts 60HZ amps 1100 rpm new this is old stock. It has never been used. The box was opened to inspect contents...(February 15th, 2018)