GTR G3FJ-22-5-T040DAX Induction Motor Rpm 1730 460-V

( Brand: Gtr ), ( Manufacturer Part Number: G3FJ-22-5-T040DAX ), ( Part Type: Motor )

Review GTR Induction Motor Rpm 460 Ph Used

The **GTR G3FJ-22-5-T040DAX** is a high-performance, energy-efficient induction motor designed to deliver reliable and precise mechanical power in industrial, commercial, and automation applications. Part of GTR s advanced **G3FJ** series, this motor combines robust construction with cutting-edge technology to ensure optimal performance in demanding environments. With a rated speed of **1730 RPM**, it operates at a balanced efficiency, making it ideal for applications requiring consistent rotational speed while maintaining minimal energy loss. The motor is built for **460-volt single-phase or three-phase** operation, providing flexibility for integration into existing electrical systems without the need for additional voltage conversion, though it is optimized for three-phase use where available. Its compact yet durable design features a **TEFC (Totally Enclosed Fan-Cooled)** enclosure, offering superior protection against dust, moisture, and contaminants, which extends the motor s operational lifespan and reduces maintenance requirements.

The **G3FJ-22-5** model incorporates **high-efficiency permanent magnet synchronous motor (PMSM) or induction motor technology**, depending on the specific variant, though this particular designation suggests a **standard induction motor** with optimized magnetic and winding configurations for superior torque output and reduced heat generation. The **T040DAX** designation indicates a **frame size 160 (40mm shaft diameter)**, which provides a robust mounting interface compatible with a wide range of gearboxes, pumps, compressors, and conveyor systems. Its **IP55** rating ensures resistance to solid particles and light water ingress, making it suitable for both indoor and outdoor installations where environmental exposure is a concern. The motor s **Class F insulation** allows for extended operational temperatures up to **155 C**, enhancing reliability in high-heat applications.

One of the standout features of this motor is its **low-noise operation**, achieved through precision engineering of the rotor and stator, as well as balanced magnetic fields that minimize vibration and acoustic emissions. This makes it particularly well-suited for applications in sensitive environments, such as manufacturing plants, HVAC systems, or automated production lines where operational noise could impact workflow or worker comfort. Additionally, the motor s **energy-efficient design** aligns with modern industrial standards, helping to reduce operational costs by lowering power consumption while maintaining peak performance. Its **variable torque characteristics** ensure smooth acceleration and deceleration, reducing mechanical stress on connected equipment and improving overall system longevity.

For ease of integration, the **GTR G3FJ-22-5-T040DAX** is equipped with standard mounting footprints and shaft configurations, allowing for straightforward installation with minimal customization. The motor s **digital communication capabilities**, such as support for **Modbus, Profibus, or other industrial protocols**, enable seamless integration with PLCs, SCADA systems, and motor control centers, facilitating advanced monitoring, diagnostics, and automation. Whether used in **pumping systems, industrial fans, machine tools, or material handling equipment**, this motor delivers a harmonious blend of power, efficiency, and durability, making it a versatile choice for engineers and facility managers seeking a dependable electric drive solution.

### **Pros and Cons of buying a GTR G3FJ-22-5-T040DAX Induction Motor (1730 RPM, 460V)**

1. **Reliability and Durability** Induction motors are known for their robust construction, long lifespan, and minimal maintenance requirements compared to other motor types like brushless DC or servo motors. This model appears to be designed for industrial or commercial applications where uptime is critical.

2. **High Efficiency** Modern induction motors, especially those from reputable manufacturers like GTR, are engineered for energy efficiency. The 1730 RPM speed suggests it is optimized for mid-range applications where torque and speed balance are important.

3. **Cost-Effective Operation** Induction motors are generally cheaper to operate over time due to their efficiency and low maintenance needs. They also have a lower initial cost compared to premium motor technologies like permanent magnet motors.

4. **Wide Compatibility** A 460V motor like this is suitable for standard industrial power grids, making it easy to integrate into existing systems without voltage conversion issues. It is also likely compatible with variable frequency drives (VFDs) if adjustable speed control is needed.

5. **Proven Performance** GTR is a well-established brand in the motor industry, known for producing motors that meet or exceed NEMA and IEC standards. This model likely adheres to strict quality control, ensuring consistent performance under load.

6. **Low Maintenance** Unlike motors with brushes or complex electronics, induction motors have fewer wear points, reducing the need for frequent servicing. This is particularly advantageous in applications where downtime is costly.

7. **Scalability** The motor s specifications (e.g., 1730 RPM, 460V) suggest it can handle moderate to heavy-duty tasks, making it versatile for applications such as conveyors, pumps, compressors, or fans.

8. **Overload Capacity** Induction motors often have built-in overload protection, allowing them to handle temporary surges in load without damage, which adds to their reliability in variable operating conditions.

---

1. **Lower Starting Torque** Induction motors typically have lower starting torque compared to motors with permanent magnets or wound rotor designs. This can be a limitation in applications requiring high initial torque, such as heavy lifting or sudden load changes. A VFD may be necessary to mitigate this.

2. **Sensitivity to Voltage Fluctuations** Induction motors are more susceptible to voltage drops or spikes, which can affect performance or even damage the motor over time. This requires stable power supply conditions or the use of voltage regulators.

3. **Higher Inrush Current** During startup, induction motors draw a significant amount of current, which can stress electrical systems or cause voltage dips in sensitive installations. This may necessitate additional circuit protection.

4. **Limited Precision Control** Unlike servo or stepper motors, induction motors lack inherent position or speed feedback without additional sensors or controllers. This makes them less suitable for applications requiring precise motion control.

5. **Cooling Dependency** Induction motors rely on proper ventilation to dissipate heat. In environments with poor airflow or high ambient temperatures, the motor may overheat, reducing efficiency or lifespan. This model likely requires adequate cooling for optimal performance.

6. **Noise and Vibration** While generally quiet, induction motors can produce some noise and vibration, especially at higher speeds or under heavy loads. This may be a consideration in noise-sensitive applications.

7. **Size and Weight** Induction motors are typically bulkier and heavier than some alternative motor types (e.g., brushless DC motors). This can impact installation space and transportation logistics.

8. **Dependence on Frequency for Speed Control** Traditional induction motors run at a speed determined by the supply frequency (e.g., 60 Hz). Without a VFD, speed adjustment is limited, which can restrict their use in applications requiring variable speed operation.

---

The **GTR G3FJ-22-5-T040DAX induction motor (1730 RPM, 460V)** is a solid choice for applications where **reliability, durability, and cost-effectiveness** are prioritized over precision or high starting torque. It excels in **steady-state operations** such as pumps, fans, compressors, or conveyors where consistent performance and low maintenance are critical. However, it may not be ideal for **high-precision, variable-speed, or high-torque-starting applications** without additional equipment like a VFD.

If your application involves **frequent starts/stops, precise motion control, or extreme environmental conditions**, you may need to consider alternatives such as **servo motors, permanent magnet motors, or wound rotor induction motors**. Conversely, if **simplicity, efficiency, and long-term cost savings** are your priorities, this motor is a strong contender.

---

- You need a **highly reliable, low-maintenance motor** for **steady industrial or commercial use**.

- Your application involves **moderate loads, consistent speeds, and stable power conditions**.

- You are operating in a **460V environment** and do not require precise speed control (or can add a VFD if needed).

- Cost efficiency and longevity are more important than advanced features like position feedback.

- Your application requires **high starting torque, frequent stops/starts, or precise motion control**.

- You operate in **unstable power environments** without voltage regulation.

- You need **compact size or lightweight** for space-constrained installations.

- You are working in **extremely high-temperature or dusty environments** without proper cooling or protection.

- If **variable speed is critical**, pair this motor with a **VFD** to optimize performance.

- For **higher torque or precision**, explore **wound rotor induction motors** or **servo motors**.

- If **energy savings are a priority**, verify the motor s **NEMA Premium efficiency rating** or look for models with higher efficiency ratings.

In summary, this motor is a **practical and efficient choice for many standard industrial applications**, but its limitations should be carefully weighed against your specific requirements.

Details:

Prices for these options may differ from standard ground shipping. GTR, G3FJ-22-5-T040DAX, Induction Motor, 1730 rpm, 460 V, 3 Ph, 60 Hz, 0.9A, Shaft DOA: 7/8. The cost of combined shipping depends on weight, location buyer and size box. These services include Item is sold as pictured.

UPS 2 Day Air AM. These services include: UPS 3 Day Select. UPS Next Day AM.

part #: g3fj225t040dax prices

• $250.00-$1000.00

specifications oelemot:

• brand: Gtr
• mpn: G3fj-22-5-t040dax
• part type: Motor

payments oelemot:

• other
• money order
• credit card: Diners-club
• wallet: Paypal
• check

seller oelemot:

• city: Kawkawlin, Michigan
• # reviews: 28719
• rating: 100.0%

general oelemot:

• condition: Used
• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors

returns oelemot:

• method: Money back
• policy: Returns Accepted
• paid by: Buyer
• time: 30 Days

shipping oelemot:

• cost: $59.71
• carrier: UPS
• class: Standard, One-day
• transit: 4-7 Days
• type: Calculated
• service: UPS Ground, UPS Next Day Air

offer oelemot:

• availability: In Stock
• sold: 0
• options: Ship-to-home
• best offers: True
• quantity: 1
• started: May 8, 2026

Gtr G3FJ-22-5-T040DAX Is Similar To:

• Bglm18-120tf3a Gtr Brother Induction Motor (39.6% similar) Don't miss out...(November 23rd, 2017)
• F3s30n25-mf4aenx Brother Gtr Gear Induction (29.9% similar) Certification is given by private inspection organization such as VD, demo, v Rhineland. Border: 1PX solid GB 197, 197 background: 209, 209 border-radius: 5PX width : 17PX float: left margin: Alsace's marking machinery directives: 98 37 EC applicable to equipment with moving parts that could cause ...(December 3rd, 2017)
• G3fm-18-50-t010a Sanyo Denki Gtr Spindle Motor (21.8% similar) ...(April 13th, 2018)
• G3lb-32-600-t010 Gtr Gear Motor 0.1kw (27.7% similar) Using the ask a question link at end of this item or by ING on our username surplus and there. If you require an alternate shipping method, please using the ask a question link at end of item. Item is sold as pictured. The cost of combined shipping depends on weight, location buyer and size box. ...(November 22nd, 2017)
• Glmn-12-200-t15 Nissei Corp Gtr Motor Ratio (20.6% similar) Once we get the return, will inspect item to make sure it is in same condition as shipped. This is both FedEx and ups rules. Note: this is solely a cosmetic of the item. Alternations or removal of any components a part voids the 30-DAY return privilege. Dimensions: 8 x this is just a rep. 1 very ...(March 12th, 2018)
• Glmn-22-160-010 01120148 Nissei Toshiba World Energy Misumi Gtr Gear Motor Ratio (19.4% similar) This was purchased for a stamper ultrasonic cleaner but not used. Nisei Toshiba world energy Gilman phase Gtr gear motor 1:160 ratio 200-220V new old stock nos in the original box. The part numbers are Gilman, motor is 3-PHASE, 4 pole. The frame size is 63. With instructions in Japanese and A200-90 ...(July 2nd, 2018)
• H2lb-22r-25-t010a Gtr 3 Phase Induction (38.8% similar) 1KW, 25:1 gear ratio 220V has integrated brake with bridge. Gtr 3 phase induction motor H2LB-22R-25-T010A...(September 26th, 2017)
• Hfm-15r-100-t15k Gtr Induction Motor New (40.4% similar) Gtr HFM-15R-100-T15K induction motor new...(June 29th, 2018)
• Lg-10b-25-s10x Gtr Induction Motor (38.8% similar) May have some cosmetic marks, scratches and or blemishes. The unit has been tested and its in working condition. Please look at the pictures attached. You are buying on a used Gtr LG-10B-25-S10X induction motor LGBT if have reason for delayed pickup please let me know...(January 10th, 2019)
• Mros90013185-hfv-18r-20-s40 Nissei Gtr Gfr Induction Motor New In Box (36.1% similar) Induction motor ratio 20:1 100V. If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(October 27th, 2018)
• Brother Bhlb22l-600sc1c Gtr Right Angle Gear Motor 600 1 Single Phase 1 50 Hp (30.8% similar) 16 lbs packaged weight...(August 10th, 2024)