LIMING MACHINERY CM08IG25TBT Ming Ac Induction Motor Li 25W 1600RPM 200-220VAC 3PH-USED

( Brand: Liming Machinery ), ( Manufacturer Part Number: CM08IG25TBT ), ( Part Type: Ac Motor ), ( Ac Phase: Three Phase )

Review LIMING MACHINERY Li Ming Ac Induction Motor 25w 1600rpm 200-220vac 3ph-used

The **Liming Machinery CM08IG25TBT Ming AC Induction Motor (25W, 1600 RPM, 200-220VAC, 3-Phase, Used)** is a robust and versatile electric motor designed for a wide range of industrial, agricultural, and mechanical applications. This compact yet efficient unit belongs to the **Ming brand**, a trusted manufacturer known for producing reliable and cost-effective machinery components. With a nominal power output of **25 watts**, this motor is ideal for low-load applications where precision and consistency are essential, such as in small conveyors, fans, pumps, compressors, or automated machinery systems. Operating at a steady **1600 revolutions per minute (RPM)**, it delivers smooth and consistent rotational power, making it suitable for applications requiring moderate speed without excessive wear or overheating.

Built with a **three-phase AC induction design**, this motor operates efficiently within a voltage range of **200-220 volts AC**, ensuring compatibility with standard industrial power supplies in many regions. The **CM08IG25TBT** model features a **frame size 8**, which balances compactness with sufficient torque for its power rating, making it a practical choice for space-constrained environments. As a **used unit**, this motor has likely undergone reliable operation, though it should be inspected for wear on brushes, bearings, and insulation before use. Proper maintenance, such as lubrication of bearings and regular cleaning, will extend its lifespan and ensure optimal performance.

The motor s **induction design** provides inherent advantages, including simplicity in construction, durability, and minimal maintenance requirements compared to other motor types. Its **AC induction mechanism** eliminates the need for complex electronic controls, making it a dependable option for both new and refurbished machinery setups. Whether integrated into a **small-scale manufacturing line, agricultural equipment, or HVAC systems**, this motor offers a balance of affordability and performance, making it a cost-effective solution for businesses seeking reliable power without the expense of a new unit. For those looking to upgrade or replace an existing motor, the **Liming Machinery CM08IG25TBT** presents a practical and efficient alternative, provided it meets the specific voltage, speed, and load requirements of the intended application.

### **Pros and Cons of Buying a Used CM08IG25TBT Ming AC Induction Motor (25W, 1600 RPM, 200-220VAC, 3-Phase)**

1. **Cost-Effective** Used motors are significantly cheaper than new ones, making them an attractive option for budget-conscious buyers, especially for small-scale applications.

2. **Proven Reliability** If well-maintained, a used motor may have already passed initial wear-and-tear phases, reducing the risk of early failure compared to a brand-new unit.

3. **Availability of Parts** Since Ming motors are widely used, spare parts (brushes, bearings, windings, etc.) are easier to source, even for older models.

4. **Lower Risk of Obsolescence** Unlike some specialized or newer technologies, induction motors remain in demand for decades, reducing the chance of becoming outdated.

5. **Good for Light-Duty Applications** At 25W, this motor is suitable for small machinery like fans, pumps, or light industrial equipment where power requirements are minimal.

6. **Energy Efficiency (Relative to Older Models)** While not as efficient as modern IE3/IE4 motors, it still performs adequately for basic tasks, especially if the original application was low-demand.

7. **No Warranty Concerns (If Purchased from a Trusted Source)** Some buyers prefer used equipment to avoid manufacturer warranties, though this comes with trade-offs in reliability.

---

1. **Unknown Maintenance History** Without service records, it s impossible to guarantee the condition of critical components like bearings, windings, or brushes (if applicable).

2. **Potential for Hidden Damage** Electrical faults (short circuits, insulation breakdown), mechanical wear (worn shafts, misaligned bearings), or overheating could go unnoticed without a thorough inspection.

3. **Lower Efficiency Compared to New Motors** Older motors may have slightly higher energy consumption due to aging components, leading to higher operational costs over time.

4. **Limited Lifespan Remaining** A used motor may have already undergone significant usage. If it s been in service for many years, its remaining operational life could be shorter than expected.

5. **Compatibility Issues** If the motor was originally paired with specific control systems or mechanical setups, adapting it to a new application may require modifications or additional costs.

6. **No Manufacturer Support** Unlike new motors, you won t have access to technical support, replacement parts under warranty, or official certifications.

7. **Risk of Overloading** If the motor was previously used in a lower-demand setup and is now repurposed for heavier loads, it may fail prematurely.

8. **Safety Concerns** Faulty insulation or damaged windings could pose electrical hazards if not properly tested before use.

---

- Resistance (ohms) of windings (should be balanced and within expected ranges).

- Bearings (listen for noise, check for play or roughness).

- Insulation resistance (high megohm readings indicate good insulation).

- Physical damage (rust, burns, misalignment).

- **Test Run** If possible, run the motor briefly to check for unusual vibrations, overheating, or strange noises.

- **Source Reputation** Buy from a trusted seller (e.g., industrial auctions, reputable used equipment dealers) with return policies or warranties.

- **Application Suitability** Ensure the motor s 25W rating matches your power needs. Overloading will reduce its lifespan.

- **Alternatives** Compare the cost of repairing/replacing parts against buying a refurbished or new motor if the price difference is minimal.

---

Buying a used **CM08IG25TBT Ming AC induction motor** can be a **cost-effective solution** for small, low-power applications where budget is a priority and the motor undergoes a thorough inspection. It is particularly viable if:

- You have access to a reliable seller with inspection reports.

- The motor is for a non-critical, low-risk application (e.g., a backup fan, small workshop tool).

- You are prepared to invest in maintenance or replacement parts if issues arise.

- The motor lacks inspection records or comes from an untrusted source.

- You require long-term reliability without maintenance risks.

- The application demands higher efficiency or extended lifespan.

- **Refurbished motors** (with warranty and testing).

- **New energy-efficient motors** (if the cost difference is negligible).

- **Renting or leasing** equipment for short-term needs.

Proceed with caution and prioritize **inspection and testing** before purchase. If the motor passes all checks and fits your needs, it can be a practical buy. Otherwise, weigh the risks against the savings sometimes paying a little more for a new or refurbished unit is the safer long-term choice. Always factor in the **total cost of ownership**, including potential repair costs, energy use, and downtime risks.

Details:

Oriental Motor 51K90A-BFUL AC Induction 110-115VAC 90W 50/60Hz-New In Box. WEG 20HP AC Motor 256TC 1755RPM 230/460VAC 3-PH TEFC-XP 02018XP3ER256TC-Used. LI MING Machinery CM08IG25TBT AC Induction Motor 25W 1600RPM 200-220VAC 3PH.

specifications oelemot:

• brand: Liming Machinery
• mpn: Cm08ig25tbt
• part type: Ac Motor
• ac phase: Three Phase

returns oelemot:

• time: 30 Days
• policy: Returns Accepted
• paid by: Buyer
• method: Money back

seller oelemot:

• city: Detroit, Michigan
• rating: 99.9%
• # reviews: 15012

shipping oelemot:

• type: Fixed
• carrier: FedEx
• cost: $14.00
• transit: 3-7 Days
• service: FedEx Ground / FedEx Home Delivery
• class: Standard

general oelemot:

• condition: Used
• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors

offer oelemot:

• best offers: True
• quantity: 1
• options: Ship-to-home
• availability: In Stock
• sold: 0
• started: May 12, 2026

payments oelemot:

• other
• wallet: Apple-pay
• credit card: Diners-club

Liming Machinery CM08IG25TBT Is Similar To:

• Liming Cm09ig60safv-msmk Motor 1ph 110 115vac 60w 90-1600 Rpm (36.5% similar) Shipping services. Liming CM09IG60SAFV-MSMK motor 1PH 110/115VAC 60W 90-1600 rpm. 3-R6B-104939-ZJ-ZY...(September 23rd, 2025)
• Liming Motor Sv-a10 Sva10 0.2kw 1 5 Rat 4pole 60hz 110 220v 344rpm Used (39.2% similar) Shipped with ups ground. Condition is used. Liming motor SV-A10 SVA10 0.2KW 1/5 rat 4POLE 60HZ 110/220V 344RPM motor used...(January 7th, 2026)