DEXTER 9376-293-012 Motor Single Phase T600 220V Phase.

( Brand: Dexter ), ( Manufacturer Part Number: 9376-293-012 ), ( Part Type: Motor ), ( Rated Load: Hp ), ( Current Type: Ac ), ( Ac Frequency Rating: 60 Hz ), ( Nominal Rated Input Voltage: 220 V ), ( Ac Phase: Single Phase )

Review DEXTER Motor 220v Single Phase. Refurbished

The **Dexter 9376-293-012 T600 Series 220V Single-Phase Motor** is a robust, high-performance electric motor designed for demanding industrial, commercial, and heavy-duty applications where reliability and efficiency are paramount. Engineered with precision, this motor belongs to Dexter s trusted T600 series, renowned for its durable construction and adaptability across a wide range of machinery, including conveyors, pumps, compressors, fans, and industrial equipment. Built to operate seamlessly under continuous duty cycles, the motor delivers consistent torque and speed, ensuring optimal performance even in the most challenging environments. Its **220V single-phase power requirement** makes it ideal for regions where standard single-phase electrical infrastructure is available, offering a balance of power and accessibility without compromising on performance.

The Dexter 9376-293-012 features a **totally enclosed fan-cooled (TEFC) design**, which protects internal components from dust, moisture, and contaminants while efficiently dissipating heat through a built-in cooling fan. This enclosure type enhances the motor s longevity by preventing corrosion and reducing wear, making it suitable for both indoor and outdoor applications where exposure to harsh elements is a concern. The motor s **ball-bearing construction** ensures smooth operation and minimal friction, contributing to reduced energy consumption and extended service life. Additionally, its **high-efficiency motor windings** are meticulously insulated to withstand elevated temperatures, further safeguarding against premature failure and enhancing overall operational reliability.

One of the standout features of this motor is its **versatile mounting flexibility**, accommodating a variety of shaft configurations, including foot-mounted, flange-mounted, or direct-drive setups, depending on the application s specific requirements. The robust **cast iron end bells and housing** provide exceptional structural integrity, absorbing mechanical stress and vibrations that could otherwise lead to misalignment or premature wear. Dexter s commitment to quality is evident in the motor s **rigorous testing and certification**, ensuring compliance with industry standards for safety, performance, and durability. Whether integrated into a conveyor system for material handling, a pump for fluid transfer, or a compressor for air or gas applications, the 9376-293-012 delivers the power and endurance required to maintain uninterrupted productivity.

For maintenance and operational convenience, the motor is equipped with **easy-access components**, including a sealed bearing housing that minimizes the need for frequent lubrication and a design that simplifies disassembly for routine inspections or repairs. Dexter s reputation for innovation extends to this model, which often incorporates **energy-saving features** and **low-noise operation**, making it a cost-effective choice for facilities prioritizing both efficiency and operational quietness. With its **compact yet sturdy build**, the 9376-293-012 is engineered to fit seamlessly into existing systems without requiring extensive modifications, offering a practical solution for upgrading or replacing older, less efficient motors. In summary, the Dexter 9376-293-012 T600 Series 220V Single-Phase Motor is a testament to Dexter s engineering excellence, combining durability, efficiency, and adaptability to meet the rigorous demands of modern industrial applications.

The Dexter 9376-293-012 T600 motor (220V, single-phase) is a heavy-duty motor commonly used in industrial applications such as conveyors, pumps, and compressors. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of the Dexter 9376-293-012 T600 Motor**

1. **High Performance and Reliability**

The T600 series is known for its robust construction and durability, designed to handle continuous heavy-duty operations. Dexter motors are engineered for longevity, often exceeding standard industry expectations in terms of service life, especially in applications with moderate to high loads.

2. **Energy Efficiency**

Dexter motors are designed with energy-saving features, such as optimized windings and high-efficiency cores. The T600 model, in particular, is built to reduce energy consumption while maintaining performance, which can lead to cost savings over time.

3. **Wide Compatibility**

This motor is compatible with a variety of industrial applications, including conveyors, fans, pumps, and compressors. Its 220V single-phase configuration makes it suitable for facilities where single-phase power is readily available, though it may require additional equipment (like a capacitor start/run setup) for certain applications.

4. **Easy Maintenance**

Dexter motors are designed with accessibility in mind. Components like bearings, windings, and brushes (if applicable) are relatively easy to replace, reducing downtime during maintenance. The motor s robust construction also minimizes the risk of internal failures that could disrupt operations.

5. **Noise and Vibration Reduction**

The T600 series incorporates design features to minimize noise and vibration, contributing to a smoother operational environment. This is particularly beneficial in applications where noise levels must be kept low or where excessive vibration could damage connected equipment.

6. **Brand Reputation**

Dexter is a well-established manufacturer with a strong reputation for quality and innovation in industrial motors. Purchasing from a reputable brand often comes with better customer support, availability of spare parts, and warranties, which can be critical for long-term reliability.

7. **Customization Options**

Dexter offers various mounting configurations, shaft sizes, and enclosure types (e.g., open, drip-proof, or totally enclosed). This flexibility allows for tailored solutions to fit specific application requirements.

---

### **Cons of the Dexter 9376-293-012 T600 Motor**

1. **Higher Upfront Cost**

Compared to generic or lower-end motors, the Dexter T600 is priced higher due to its premium build quality, efficiency, and brand reputation. For budget-conscious buyers, this may be a significant drawback, especially if the motor is not absolutely necessary for the application.

2. **Potential Overkill for Light-Duty Applications**

If the motor is being used in a light-duty or low-load application, its robust design may be unnecessary. Over-engineering can lead to higher costs without proportional benefits in performance or longevity.

3. **Specialized Installation Requirements**

Some applications, particularly those requiring high starting torque (e.g., pumps or compressors), may require additional components like capacitor start/run units or soft starters. These add to the initial setup cost and complexity.

4. **Limited Availability of Aftermarket Parts**

While Dexter motors are reliable, finding aftermarket or third-party parts (e.g., seals, bearings, or windings) may be more challenging compared to more common motor brands. This could lead to longer wait times for repairs or replacements.

5. **Single-Phase Limitations**

Single-phase motors are generally less efficient and powerful than their three-phase counterparts. If the application could benefit from three-phase power (e.g., higher torque or smoother operation), a Dexter three-phase motor might be a better fit, albeit more expensive.

6. **Weight and Size**

The T600 motor is a heavy-duty unit, which means it is physically larger and heavier than standard motors. This can complicate installation, especially in space-constrained environments, and may require additional structural support.

7. **Potential for Overheating in Poorly Ventilated Environments**

While the motor is designed for efficiency, inadequate ventilation or cooling can lead to overheating, particularly in enclosed or high-temperature environments. Proper installation and maintenance are critical to prevent this issue.

---

### **Conclusion**

The Dexter 9376-293-012 T600 motor is an excellent choice for heavy-duty industrial applications where reliability, efficiency, and longevity are prioritized. Its robust construction, energy-saving features, and compatibility with a wide range of equipment make it a strong contender for applications such as conveyors, pumps, and compressors. However, its higher cost, potential overkill for light-duty use, and specialized installation requirements may not make it the best fit for every scenario.

For buyers with tight budgets or applications that do not demand the T600 s capabilities, a more cost-effective motor (e.g., a standard industrial motor from a different brand) might suffice. Conversely, if the application involves high loads, continuous operation, or demanding environmental conditions, the Dexter T600 s advantages far outweigh its drawbacks.

---

### **Recommendation**

- You are operating in a heavy-duty industrial environment where reliability and efficiency are critical.

- Your application requires continuous operation under moderate to high loads (e.g., conveyors, pumps, or compressors).

- You can justify the higher upfront cost with long-term savings in energy efficiency and reduced maintenance.

- You have access to proper installation and maintenance support to ensure optimal performance.

- Your application is light-duty or low-load, and a standard motor would suffice.

- Budget constraints make the Dexter motor prohibitively expensive without clear performance benefits.

- You require three-phase power for higher torque or smoother operation, and a single-phase motor is not ideal.

- You are unsure about the motor s compatibility with your specific setup, and consulting an expert would help avoid installation challenges.

In summary, the Dexter T600 is a premium motor well-suited for demanding industrial applications. Weigh its pros and cons carefully against your specific needs to determine whether it is the right investment.

Details:

220v SINGLE PHASE. Rebuilt motor with new bearings. Dexter T600 washer motor. 30 day warranty.

PN: 9376-293-012. Bench tested working.

part #: 9376293012 prices

• $548.88-$975.00

specifications oelemot:

• brand: Dexter
• mpn: 9376-293-012
• part type: Motor
• rated load: Hp
• current type: Ac
• ac frequency rating: 60 Hz
• nominal rated input voltage: 220 V
• ac phase: Single Phase

offer oelemot:

• options: Ship-to-home
• sold: 0
• quantity: 1
• availability: In Stock
• best offers: True
• started: March 16, 2026

returns oelemot:

• policy: Returns Accepted
• paid by: Buyer
• method: Money back
• time: 30 Days

general oelemot:

• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors
• condition: Used

shipping oelemot:

• service: FedEx Ground / FedEx Home Delivery
• transit: 3-8 Days
• class: Standard
• carrier: FedEx
• type: Calculated
• cost: $137.48

seller oelemot:

• city: Patchogue, New York
• # reviews: 27
• rating: 100.0%

payments oelemot:

• wallet: Paypal
• other
• credit card: Visa

Dexter 9376-293-012 Is Similar To:

• Dexter 9376-319-001 Washer Motor Three 3 Phase Marathon For Parts Repair (50.4% similar) No repairs or harness check was attempted. We had an extra motor and replaced. Washer was going through wash cycle but not extract. Motor pulled from a T400 Dexter washer with three years of use...(October 26th, 2024)
• Marathon Motors 9732-279-001 Used Oem Dexter Dryer Motor Pn 9376-309-003 Please Read Disc (32.9% similar) Item as is depicted in photos. This item is in heavily used condition and has a damaged connector, missing cover plate, screw for dust bunnies, etc. Please reference all photos carefully...(November 14th, 2025)