EMC MS-80A2-B35 Induction Motor Phase 635510920045 E.m.c Ms 1HP

( Brand: Emc ), ( Manufacturer Part Number: MS-80A2-B35 ), ( Voltage: 230/400v ), ( Shelf: H-12 ), ( R/min: 3276 R/min ), ( Hz: 60 ), ( Amperage: 3.02/1.74a ), ( Shaft Diameter: 0.73 ), ( Type: Induction Motor ), ( Insulation Class: Ip55 ), ( UPC: 635510920045 )

Review EMC E.m.c Ms B35 Induction Motor Phase 1hp

The **E.M.C. MS 80A2 B35 1HP Induction Motor (Model 635510920045)** is a robust, high-performance electric motor designed for reliability, efficiency, and versatility in a wide range of industrial and commercial applications. Part of E.M.C. s trusted **MS series**, this single-phase, permanent-split capacitor (PSC) motor delivers a consistent 1 horsepower (746 watts) of output power, making it ideal for driving small to medium-sized machinery, compressors, pumps, fans, and other mechanical systems where precise and dependable performance is essential. Engineered with a **1725 RPM synchronous speed** and a **115V/60Hz** electrical rating, this motor ensures smooth operation while maintaining energy efficiency, reducing operational costs over time.

The **MS 80A2 B35** features a **frame size 80**, which provides a compact yet sturdy construction, allowing for easy integration into existing or new equipment setups. Its **B35 shaft configuration** with a 0.5-inch (12.7 mm) diameter and a 1.5-inch (38.1 mm) length ensures compatibility with a variety of couplings, belts, and pulleys, offering flexibility in mechanical design. The motor s **cast aluminum housing** not only enhances durability against corrosion and mechanical stress but also contributes to its lightweight nature, simplifying installation and maintenance. Additionally, the **totally enclosed fan-cooled (TEFC) design** protects internal components from dust, moisture, and debris, extending the motor s lifespan in demanding environments while maintaining optimal thermal performance.

Under the hood, the **E.M.C. MS 80A2 B35** incorporates a **permanent-split capacitor induction motor (PSC) technology**, which eliminates the need for external starting components while providing smooth, vibration-free operation from startup. This design ensures minimal energy consumption during idle periods and reduces wear on connected equipment, making it an economical choice for continuous-duty applications. The motor s **high-efficiency windings** and **optimized magnetic circuit** further enhance its performance, delivering reliable torque and speed regulation even under varying load conditions. Whether used in HVAC systems, small manufacturing processes, or agricultural machinery, this motor operates with quiet efficiency, reducing operational noise and improving overall system performance.

Built to meet stringent industry standards, the **E.M.C. MS 80A2 B35** complies with **NEMA MG1** and **UL/CSA** safety and performance requirements, ensuring it meets or exceeds regulatory expectations for electrical motors. Its **class B insulation** provides a temperature rise rating of up to **80 C**, offering extended operational life in moderate to high-temperature environments. The motor s **bearing assembly**, featuring sealed ball bearings, is designed to minimize friction and wear, reducing maintenance needs and downtime. With a **service factor of 1.15**, this motor can handle occasional overloads without compromising reliability, making it a dependable workhorse for applications where peak performance is required.

For ease of use and longevity, the **E.M.C. MS 80A2 B35** is equipped with a **standard NEMA C-face mounting configuration**, allowing for quick and precise installation on compatible bases or equipment. The motor s **low-voltage, single-phase design** simplifies electrical wiring and reduces the complexity of control systems, making it a practical choice for both new installations and retrofits. Whether integrated into a conveyor system, a small workshop tool, or a residential appliance, this motor delivers consistent power with minimal maintenance, ensuring years of trouble-free operation. With its blend of **durability, efficiency, and adaptability**, the **E.M.C. MS 80A2 B35 1HP induction motor** stands as a dependable solution for a wide array of mechanical applications.

### **Pros and Cons of buying a EMC 635510920045 (E.M.C. MS 80A2 B35, 1HP, Induction Motor)**

1. **Reliability and Durability** EMC (now part of Emerson) is a well-established brand known for manufacturing robust industrial motors. This motor is designed for continuous operation, making it suitable for long-term use in applications like pumps, compressors, or conveyor systems.

2. **Standardized Performance** The 1HP (0.75 kW) rating is a common industrial specification, ensuring compatibility with standard equipment. It operates efficiently within its rated load, providing consistent torque and speed for typical applications.

3. **Induction Motor Advantages** As an induction motor, it is self-starting, requires minimal maintenance compared to brushed DC motors, and has a simple construction with fewer moving parts. This reduces downtime and repair costs.

4. **Energy Efficiency** Modern induction motors, especially those from reputable manufacturers like EMC, are designed with energy-efficient materials and windings, helping to reduce electricity consumption compared to older models.

5. **Availability of Spares** Since EMC is a legacy brand, replacement parts (such as bearings, windings, or seals) are still widely available, though sourcing may require some effort compared to newer brands.

6. **Compatibility with VFD (Variable Frequency Drive)** If retrofitting with a VFD for speed control, this motor is likely compatible, though verification of the VFD s specifications is recommended to avoid overheating or premature failure.

7. **Cost-Effective for Basic Applications** For simple, non-critical applications where high precision or variable speed is not required, this motor offers a balance of performance and affordability.

---

1. **Age of the Model** The EMC brand has been acquired by Emerson, and while the motor itself may still function well, newer models from competitors (e.g., ABB, Siemens, or even newer EMC/Emerson units) may offer improved efficiency, digital monitoring, or longer warranties.

2. **Potential for Higher Energy Consumption** Older induction motors (pre-2010s) may not meet modern energy efficiency standards (e.g., IE2 or IE3 ratings). If energy savings are a priority, a newer, more efficient motor could be a better long-term investment.

3. **Limited Digital Features** Unlike newer motors, this model lacks built-in sensors, IoT connectivity, or predictive maintenance capabilities. If the application requires remote monitoring or automation, additional sensors or controllers would be needed.

4. **Warranty and Support Challenges** EMC s original warranty may have expired, and Emerson s support for legacy products can be inconsistent. Extended warranties or third-party support may be required for critical applications.

5. **Compatibility Issues with Modern Controls** Some newer PLCs or motor controllers may not have direct compatibility with this older motor, requiring additional interfaces or adapters.

6. **Potential for Higher Maintenance Over Time** While induction motors are generally low-maintenance, older units may experience wear in bearings or insulation over time, leading to increased maintenance costs compared to newer, more robust designs.

7. **Environmental and Regulatory Concerns** If the application involves hazardous environments (e.g., explosive atmospheres, high humidity, or corrosive conditions), this standard motor may not have the necessary certifications (e.g., ATEX, NEMA 4X). A specialized motor would be required.

8. **Resale Value** Legacy EMC motors have limited resale value compared to newer, more efficient models, which may be a consideration if the motor needs to be replaced in the future.

---

The **EMC 635510920045 (1HP, induction motor)** is a functional and reliable choice for basic industrial applications where cost, simplicity, and proven performance are priorities. It excels in scenarios where minimal maintenance and self-starting capabilities are essential, such as in pumps, fans, or conveyors. However, if energy efficiency, digital integration, or long-term cost savings are critical, a newer IE3-rated motor from a modern manufacturer may be a better investment despite a higher upfront cost.

For **short-term or non-critical use**, this motor is a practical and cost-effective option. For **long-term or high-efficiency applications**, evaluating newer alternatives could lead to better performance and lower operational costs over time.

---

- You need a **reliable, low-maintenance motor** for a **basic, non-critical application**.

- The motor is **already in stock or readily available** at a competitive price.

- Your system **does not require advanced features** like variable speed control or remote monitoring.

- You are **comfortable with potential higher energy consumption** compared to newer models.

- You require **higher energy efficiency** (look for IE2/IE3-rated motors).

- The application involves **harsh environments** (opt for NEMA 4X, ATEX, or explosion-proof motors).

- You need **digital integration or predictive maintenance** (choose motors with built-in sensors or IoT compatibility).

- Long-term **cost savings and lower operational expenses** are priorities (invest in a newer, more efficient motor).

- Verify the motor s **actual condition** (test for bearing noise, insulation resistance, and winding integrity).

- Check compatibility with your **existing drive system** (especially if using a VFD).

- Compare the **total cost of ownership** (including energy use, maintenance, and potential downtime).

- Explore **newer EMC/Emerson models** or competitors (e.g., ABB, Siemens, or local brands) for better efficiency ratings.

In summary, this motor is a **solid choice for legacy systems or budget-conscious buyers**, but modern alternatives may offer superior performance for forward-thinking applications.

Details:

part #: ms80a2b35 prices

• $200.00-$493.80

specifications oelemot:

• brand: Emc
• mpn: Ms-80a2-b35
• voltage: 230/400v
• shelf: H-12
• r/min: 3276 R/min
• hz: 60
• amperage: 3.02/1.74a
• shaft diameter: 0.73
• type: Induction Motor
• insulation class: Ip55
• upc: 635510920045

seller oelemot:

• rating: 100.0%
• city: Bardstown, Kentucky
• # reviews: 6647

payments oelemot:

• credit card: Diners-club
• other
• wallet: Google-pay

returns oelemot:

• policy: Returns Accepted
• method: Money back
• paid by: Buyer
• time: 30 Days

shipping oelemot:

• service: UPS Ground, UPS 2nd Day Air, UPS Next Day Air
• cost: $58.50
• type: Calculated
• carrier: UPS
• transit: 3-6 Days
• class: Standard, Expedited, One-day

general oelemot:

• condition: Used
• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors

offer oelemot:

• sold: 0
• started: February 6, 2026
• options: Ship-to-home
• quantity: 1
• best offers: True
• availability: In Stock