ROCKWELL/DELTA 62-413 Capacitor Motor Shaft Reversible 1/3 5/8 1725RPM 115V

( Brand: Rockwell/delta ), ( Manufacturer Part Number: 62-413 ), ( Part Type: Hp Motor Shaft ), ( Rated Load: Hp ), ( Ac Frequency Rating: 60 Hz ), ( Special Motor Construction: Capacitor Start ), ( Base Rpm: 1725 ), ( Shaft Type: Keyed ), ( Shaft Diameter: 5/8 ), ( Mounting Type: Base-mounted, Foot-mounted ), ( Reversible/non-reversible: Reversible ), ( Current Type: Ac ), ( Nominal Rated Input Voltage: 115 V ), ( Ac Phase: Single Phase ), ( Country Of Origin: United States )

Review ROCKWELL/DELTA Capacitor Motor 1/3 Hp 5/8 Inch Shaft 1725rpm 115v Reversible #62-413

The **Rockwell Automation (Delta) 62-413 Capacitor Start/Run Single-Phase Motor** is a robust, high-performance electric motor designed for demanding applications requiring reliable, reversible operation in a compact and efficient package. Engineered to deliver **1/3 horsepower (0.373 kW)** of continuous output, this motor is ideal for a wide range of industrial, commercial, and residential applications where precision control and durability are essential. With a **5/8-inch shaft diameter**, it provides a sturdy mounting interface for seamless integration into conveyor systems, fans, pumps, compressors, and other machinery where smooth, bidirectional motion is required. Operating at a standard **1725 RPM (Rated Speed)** under full load, this motor ensures consistent performance while maintaining energy efficiency, making it a cost-effective solution for long-term use.

Built with **115V single-phase AC power**, the 62-413 motor incorporates a **capacitor start/run winding system**, which eliminates the need for external relays or additional components, simplifying installation and reducing maintenance overhead. The reversible design allows for seamless forward and reverse operation, controlled via a simple three-wire connection (common, run, and reverse terminals), making it highly versatile for applications such as garage door openers, industrial mixers, HVAC dampers, and automated conveyor systems. Constructed with high-quality materials, including a **die-cast aluminum housing** for corrosion resistance and a **ball-bearing or sleeve-bearing configuration** (depending on the specific model variant), this motor is engineered to withstand frequent start-stop cycles and continuous operation without sacrificing performance.

The **62-413 motor** adheres to strict NEMA (National Electrical Manufacturers Association) standards, ensuring compatibility with standard mounting footprints and electrical connections, while its **NEMA Premium efficiency rating** further enhances its energy-saving capabilities. The motor s compact **115-frame size** (approximately 4.5 inches in diameter) allows for easy installation in tight spaces, making it a practical choice for retrofitting existing systems or integrating into space-constrained environments. Whether used in light-duty automation, small-scale manufacturing, or residential appliances, this motor delivers **smooth, quiet operation** with minimal vibration, contributing to an extended lifespan for both the motor and the equipment it drives. With its combination of **reliability, reversibility, and efficiency**, the Rockwell Automation (Delta) 62-413 capacitor motor is a dependable workhorse for applications where precision and durability are non-negotiable.

### **Pros and Cons of Buying a Rockwell/Delta 62-413 Capacitor Motor (1/3 HP, 5/8 Shaft, 1725 RPM, 115V, Reversible)**

1. **Reliable Brand Reputation** Rockwell Automation (now part of Emerson) and Delta are well-established manufacturers known for durable, high-quality motors. These brands are trusted in industrial and commercial applications, ensuring consistent performance over time.

2. **Reversible Operation** The motor s reversible capability makes it versatile for applications requiring bidirectional motion, such as conveyors, mixers, or certain types of pumps. This eliminates the need for additional mechanical reversing mechanisms.

3. **Standardized Specifications** The 1/3 HP rating, 1725 RPM, and 115V single-phase design align with common industrial and household applications, making it easy to integrate into existing systems without requiring specialized components.

4. **Capacitor Start/Permanent Split Capacitor (PSC) Design** This type of motor is energy-efficient for its class and provides smooth starting without excessive current draw, reducing strain on electrical systems compared to universal or induction motors without capacitors.

5. **Compact and Lightweight** The 5/8 shaft size and 1/3 HP rating make it suitable for applications where space is limited, such as in small machinery, appliances, or tight installations.

6. **Compatibility with Standard Controls** Since it operates on 115V single-phase power, it can be easily controlled with standard switches, relays, or variable frequency drives (VFDs) if needed for speed adjustment.

7. **Long Lifespan with Proper Maintenance** With regular upkeep (lubrication, cleaning, and inspection), these motors can last decades, offering a strong return on investment for applications where they are used frequently.

8. **Wide Availability of Replacement Parts** Due to their popularity, spare parts (brushes, bearings, capacitors, etc.) are readily available, reducing downtime if maintenance or repairs are required.

9. **Cost-Effective for Its Class** While not the cheapest motor on the market, it strikes a balance between performance and price, making it a practical choice for budget-conscious buyers who still need reliability.

10. **Quiet Operation** Capacitor motors are generally quieter than universal motors or poorly maintained induction motors, which can be advantageous in noise-sensitive environments.

---

1. **Limited Power Output** At only 1/3 HP, this motor is not suitable for heavy-duty applications requiring significant torque or continuous high-load operation. It may struggle with tasks like high-resistance pumping, large-scale mixing, or frequent starts under load.

2. **Single-Phase Limitations** Single-phase motors (like this one) are less efficient than three-phase motors and may require additional components (e.g., capacitors, starters) to function properly. They also lack the smooth torque characteristic of three-phase motors, which can lead to slight vibrations or uneven operation.

3. **Sensitivity to Voltage Fluctuations** Capacitor motors are sensitive to voltage variations. Overvoltage can cause overheating, while undervoltage can lead to reduced performance, excessive current draw, or failure to start. This may require a stable power supply or voltage regulator in some applications.

- **Capacitor Inspection**: Capacitors degrade over time and must be replaced if they fail (common failure points).

- **Bearing Lubrication**: Bearings may need relubrication every few thousand hours to prevent wear.

- **Brush Replacement (if applicable)**: Some capacitor motors use brushes for commutation, which wear out and need replacement.

- **Coil and Windings**: Over time, insulation can break down, leading to short circuits or motor failure.

5. **Not Ideal for High-Speed or Precision Applications** At 1725 RPM, this motor is not designed for high-speed applications. For precision control (e.g., CNC machines, robotics), a servo motor or stepper motor would be more appropriate.

6. **Reversing Mechanism Dependence** While reversible, the motor may require an additional reversing switch or relay, adding complexity to the control system. Frequent reversing can also increase wear on brushes and bearings.

7. **Environmental Sensitivity** Exposure to dust, moisture, or extreme temperatures can reduce the motor s lifespan. If used in harsh environments, additional protection (e.g., enclosures, seals) may be necessary.

8. **Limited Customization** This is a standard off-the-shelf motor with fixed specifications. If you need non-standard features (e.g., different RPM, voltage, or mounting options), you may need to source a custom motor, which could be more expensive.

9. **Potential for Overheating Under Load** If the motor is continuously operated near its maximum capacity or in high-temperature environments, it may overheat. Proper sizing and ventilation are essential to prevent damage.

10. **Discontinued or Hard-to-Find Models** Older models (especially from Rockwell/Delta) may become harder to source over time as manufacturers phase out certain designs. Always verify availability before purchasing.

---

The **Rockwell/Delta 62-413 capacitor motor (1/3 HP, 5/8 shaft, 1725 RPM, 115V, reversible)** is a **practical, mid-range motor** well-suited for **light to moderate-duty applications** where reliability, reversibility, and ease of use are priorities. It excels in **conveyors, small machinery, appliances, and general-purpose industrial equipment** where high torque or precision are not required.

However, it is **not ideal for heavy loads, high-speed applications, or environments with extreme conditions**. Its **maintenance needs, sensitivity to voltage, and limited power output** must be carefully considered before purchase. If the application demands **higher efficiency, smoother operation, or better torque control**, a **three-phase motor, servo motor, or variable frequency drive (VFD)-controlled motor** may be a better long-term investment.

For most **budget-friendly, general-purpose uses**, this motor remains a **solid choice** provided the user is prepared for **basic maintenance and proper installation**.

---

- You need a **reliable, reversible, 1/3 HP motor** for **light-duty tasks** (e.g., small conveyors, mixers, fans, or pumps).

- Your application operates in a **controlled environment** with **stable voltage** and **moderate load conditions**.

- You are willing to **perform routine maintenance** (capacitor checks, bearing lubrication, brush replacement if applicable).

- Cost efficiency and **off-the-shelf availability** are important factors.

- Your application requires **high torque, frequent heavy loads, or continuous high-speed operation**.

- You operate in **harsh environments** (extreme dust, moisture, or temperature fluctuations) without proper protection.

- You need **precise speed or position control** (consider a servo or stepper motor instead).

- You cannot ensure **proper voltage stability** (risk of overheating or failure).

- You anticipate **long-term high-duty-cycle use** without maintenance (expect shorter lifespan).

- **For higher torque/load:** A **1/2 HP or 3/4 HP capacitor motor** or a **three-phase motor** if available.

- **For precision control:** A **servo motor or stepper motor** with a VFD.

- **For cost savings:** A **generic brand capacitor motor** (e.g., from TECO, Leeson) if brand reliability is not critical.

- **For energy efficiency:** A **Permanent Split Capacitor (PSC) motor with a VFD** for adjustable speed control.

**Final Verdict:** This motor is a **good general-purpose choice** for many applications but should not be selected without carefully matching it to the specific demands of the task. Always verify **load requirements, environmental conditions, and maintenance capabilities** before purchasing.

Details:

Feel free to message me with any questions. VINTAGE ROCKWELL DELTA CAPACITOR ELECTRIC MOTOR 1/3 HP 1725 RPM 5/8 SHAFT 115V REVERSIBLE USA, RUNS FINE - SEE VIDEO BUILT IN ON/OFF TOGGLE SWITCH WORKS AS WELL, GOOD USED CONDITION WITH NORMAL USAGE WEAR AND AGE HAS SOME SURFACE RUST SPOTS, SCUFFS/SCRATCHES, DUST ON/IN IT, PAINT/FINISH WEAR, WILL NEED A PLUG END ADDED TO CORD, IMPERFECTIONS THE FRONT CAP CASTING, MADE BY MARATHON MFG model 62-413 HP, 115 V, 7.0 AMPS DIA.

part #: 62413 prices

• $61.99-$85.00

specifications oelemot:

• brand: Rockwell/delta
• mpn: 62-413
• part type: Hp Motor Shaft
• rated load: Hp
• ac frequency rating: 60 Hz
• special motor construction: Capacitor Start
• base rpm: 1725
• shaft type: Keyed
• shaft diameter: 5/8
• mounting type: Base-mounted, Foot-mounted
• reversible/non-reversible: Reversible
• current type: Ac
• nominal rated input voltage: 115 V
• ac phase: Single Phase
• country of origin: United States

shipping oelemot:

• type: Fixed
• class: Standard
• transit: 3-9 Days
• carrier: USPS
• service: USPS Ground Advantage
• cost: $0.00

general oelemot:

• condition: Used
• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors

offer oelemot:

• sold: 0
• started: May 19, 2026
• quantity: 1
• options: Ship-to-home
• availability: In Stock

payments oelemot:

• wallet: Google-pay
• credit card: Discover
• other

seller oelemot:

• city: Mansfield, Ohio
• rating: 100.0%
• # reviews: 8913

returns oelemot:

• policy: Returns Accepted
• method: Money back
• paid by: Buyer
• time: 30 Days

Rockwell/delta 62-413 Is Similar To:

• 438-02-314-0686 Rockwell Electric Motor (27.7% similar) Works perfect, sounds great, just as shown in photos...(August 15th, 2018)
• 56 Dbsc Reliance Rockwell Dodge Brake Motor Coupling (28% similar) Warranty this item is guaranteed to be as described. Comes in non-original packaging. It was not tested under a load. Notes: when power was applied, this item ran very smoothly. On the ask a question link at bottom of this listing. Home contact about technology industrial lab test electrical ...(October 28th, 2018)
• 60-050 Rockwell Standard Duty Single Phase Motor Rpm (29.4% similar) The wire had some cracks and rips in it so I taped them up to keep safe. I respond very quickly. It works great, on and off switch as should. This motor was originally manufactured for a sander grinder pulley machine. If there is anything else you would like to know about the motor, please feel free...(July 29th, 2018)
• 62-012 Rockwell Electric Motor Hp Ph Rpm Shaft Model (44.8% similar) ...(March 17th, 2018)
• 62-042 Rockwell-delta Vintage 1-1-2 Hp (32.6% similar) Will work with all brands and model's that require this size motor. It has original paint. Delivery confirmation is included in the domestic shipping charges. This is a heavy duty TEFL totally enclosed fan cooled motor hp 3450 RPM5 8 keyed SHAFT115 230 volt currently wired for rockwell delta 1 ...(July 3rd, 2017)
• 62-140 Vintage Rockwell Delta Hp Rpm Electric Motor Band Saw Lathe (38.2% similar) Motor is clean, quiet, and in excellent condition. Will work with all brands and model's of tools that require this spec motor. 1/2 hp 1725 RPM5 8 keyed SHAFT115 VOLT9. Rockwell delta 1/2 hp electric motor. Includes a power cord and on off toggle switch. Delivery confirmation is included in the ...(May 30th, 2018)
• 66-000 Rockwell Model Electric Motor (33.1% similar) Up for bid is a rockwell model electric MOTOR1 2 HP208 volts amps. Type 75 frame will only ship to lower 48 states of the USA...(November 7th, 2018)
• P14x4815 Rockwell Automation Tefc Washdown Motor New (26.6% similar) Reliance electric P14X4815 2HP, 3PH, 460V, TEFL, FC14STC, wash down motor WYSIWYG we never warranty calibration...(September 13th, 2018)
• Qtg-3104-a 94a1696-1 Inland Motor Rockwell (12% similar) This part is costly and may be unavailable but the repair appears to pretty minor straight forward see pictures for actual condition. The box is original but in poor condition. One of the brushes is missing carbon, they are soldered on and should be a fairly quick inexpensive repair...(December 15th, 2017)
• Mpl-b330p-mk72aa Rockwell Automation Allen-bradley New-in-box Allen Bradley A Brushless Servo Motor 460v 5000rpm (23.6% similar) New in opened box. Shrink wrap still on the motor to the cardboard plank inside. Same day shipping on orders placed before 2PM CST. You're buying on an Allen Bradley MP B330P MK72AA sear a brush less servo motor...(August 12th, 2016)
• Mpl-b430p-mj72aa Rockwell Automation Allen-bradley New Allen Bradley Parts Lot Servo Motor And Powerflex 525 (27.1% similar) Servo is new in box and power drive is new in sealed plastic without box. You get exactly whats in pictures thanks...(October 24th, 2016)