MAGNETEK 6-355802-01 Motor 7.5HP 1800RPM 230/460V 19.2/9.6A 3PH 60HZ

( Brand: Magnetek ), ( Manufacturer Part Number: 6-355802-01 ), ( Part Type: 5hp Motor )

Review MAGNETEK Motor 7.5hp 1800rpm 230/460v 19.2/9.6a 3ph 60hz Used

The **Magnetek 6-355802-01** is a robust, high-performance electric motor engineered for demanding industrial applications where reliability, efficiency, and durability are paramount. Part of Magnetek s trusted line of premium electric motors, this **7.5 horsepower (hp)** three-phase induction motor is designed to deliver consistent, high-torque performance across a wide range of mechanical systems. Operating at a nominal speed of **1800 revolutions per minute (rpm)**, it strikes an optimal balance between speed and torque, making it ideal for applications such as conveyors, pumps, compressors, fans, and other heavy-duty machinery where steady rotational force is essential. The motor is built to thrive in environments where precision and endurance are critical, ensuring prolonged operational life with minimal maintenance requirements.

Constructed with **230/460-volt (V) dual-voltage capability**, the 6-355802-01 offers versatility for integration into various electrical systems, accommodating both single and dual-voltage setups depending on the application s power infrastructure. This flexibility simplifies installation and reduces the need for additional voltage conversion equipment, enhancing cost-effectiveness and operational convenience. The motor draws **19.2 amperes (A) at 230V** and **9.6A at 460V**, ensuring it operates within standard industrial power ratings while maintaining energy efficiency. Designed for **60Hz** operation, it aligns seamlessly with North American and many international electrical grids, providing a reliable power source for continuous, high-efficiency performance.

Built to **NEMA Premium efficiency standards**, the Magnetek 6-355802-01 incorporates advanced design features such as optimized windings, high-quality magnetic materials, and precision-engineered bearings to minimize energy loss and maximize output. Its robust construction includes a **TEFC (Totally Enclosed Fan-Cooled)** enclosure, which protects internal components from dust, moisture, and contaminants while facilitating efficient heat dissipation through an integrated cooling fan. This design ensures the motor remains operational in harsh environments, such as factories, warehouses, or outdoor settings, where exposure to debris or varying weather conditions could otherwise compromise performance.

The motor s **3-phase induction design** ensures smooth, vibration-free operation, reducing mechanical stress on connected equipment and extending the lifespan of the entire system. Magnetek s attention to detail extends to the motor s mounting options, which include **foot-mounted or flange-mounted configurations**, allowing for easy integration into existing machinery or custom setups. Additionally, the motor s compact yet sturdy frame likely a **NEMA 143T or similar industrial frame size** optimizes space utilization without sacrificing power or durability.

Whether deployed in manufacturing plants, agricultural equipment, or commercial HVAC systems, the **Magnetek 6-355802-01** delivers dependable performance with minimal downtime. Its combination of **high efficiency, dual-voltage compatibility, and rugged construction** makes it a superior choice for applications requiring a balance of power, reliability, and operational flexibility. By adhering to stringent manufacturing standards and incorporating innovative engineering solutions, Magnetek ensures that this motor not only meets but exceeds industry expectations, providing a long-lasting solution for demanding industrial needs.

### **Pros and Cons of buying a Magnetek 6-355802-01 Motor (7.5 HP, 1800 RPM, 230/460V, 3-Phase, 60Hz)**

1. **Reliable Brand Reputation** Magnetek is a well-established manufacturer known for producing durable, high-quality electric motors, particularly in industrial and commercial applications. Their motors are often used in HVAC, pumps, compressors, and conveyor systems, where reliability is critical.

2. **Wide Voltage Compatibility** The motor operates on both **230V and 460V**, making it versatile for different electrical setups without requiring a complete system overhaul. This flexibility can reduce costs if the existing infrastructure already supports one of these voltages.

3. **Standard Industrial Specifications** The motor meets **NEMA Design B** standards, which are widely accepted in North American industrial applications. This ensures compatibility with standard belts, pulleys, and mechanical components.

- **HVAC systems** (blowers, fans, chillers)

- **Pumps** (water, chemical, or process pumps)

- **Conveyor systems** (material handling)

- **Compressors** (light-duty air or refrigeration)

- **Agitators and mixers** in manufacturing

The **1800 RPM** speed is a common industrial standard, balancing torque and efficiency for many applications.

5. **Three-Phase Operation** Three-phase motors are generally more efficient and provide smoother operation compared to single-phase motors, especially in high-torque applications. This reduces energy consumption and mechanical stress.

6. **Standard Current Draw** The motor draws **19.2A at 230V and 9.6A at 460V**, which is within typical industrial breaker ratings (e.g., 20A or 15A breakers). This makes it easier to integrate into existing electrical panels without requiring oversized wiring or protective devices.

7. **Long Lifespan with Proper Maintenance** Magnetek motors are built for durability and can last **15 25 years** with regular maintenance (lubrication, alignment checks, and voltage/current monitoring). This reduces long-term replacement costs.

8. **Easy Replacement for Existing Motors** If the motor is failing in an existing system, this replacement part is likely to fit dimensionally and electrically, minimizing downtime and installation costs.

9. **Available Support and Parts** Magnetek (now part of **Emerson**) has a strong aftermarket support system, meaning spare parts, repair services, and technical documentation are widely available.

10. **Cost-Effective for Medium-Duty Use** While not the cheapest motor on the market, its **balance of performance, reliability, and price** makes it a practical choice for many industrial and commercial applications.

---

1. **Higher Upfront Cost Compared to Generic Brands** Magnetek motors are premium-priced compared to no-name or generic motors. For budget-conscious buyers, cheaper alternatives (e.g., from lesser-known manufacturers) may be tempting, but they often lack the same warranty and longevity.

2. **Requires Proper Installation and Maintenance** Like all electric motors, this unit **must be properly wired, aligned, and maintained** to avoid premature failure. Poor installation (e.g., incorrect belt tension, misalignment, or voltage fluctuations) can reduce efficiency and lifespan.

3. **Not Ideal for High-Speed or High-Torque Applications** At **1800 RPM**, this motor is not suited for **high-speed machining, centrifugal pumps requiring >2000 RPM, or heavy-duty compressors**. For such applications, a **higher RPM or variable frequency drive (VFD)-compatible motor** may be needed.

4. **Dependence on Three-Phase Power** If the facility lacks a **three-phase electrical supply**, this motor cannot be used without additional infrastructure (e.g., a phase converter, though these are inefficient and not recommended for continuous use).

5. **Potential for Overloading in Continuous Duty** While rated for **continuous duty (S1)**, prolonged operation at **full load (7.5 HP)** without proper cooling or ventilation can lead to overheating. Ensure the motor is **properly ventilated** and not overloaded.

6. **Limited Customization Options** Unlike some high-end motors, this is a **standard industrial motor** with limited options for customization (e.g., enclosures, IP ratings, or special mounting configurations). If specialized requirements exist, a custom motor may be necessary.

7. **Potential for Higher Energy Costs Without Efficiency Upgrades** While efficient by standard industrial motor standards, **older systems may benefit from a VFD or energy-efficient motor** to reduce long-term electricity costs. This motor alone may not provide the lowest operational expenses.

8. **Warranty Limitations** Standard Magnetek warranties typically cover **defects in materials and workmanship for 1 2 years** (varies by region). Extended warranties or service contracts may be required for critical applications.

- The **bearing housing, shaft diameter, and mounting footprint** match.

- The **control system** (star-delta starter, soft starter, or VFD) is compatible.

- The **cooling method** (fan-cooled) is adequate for the environment.

10. **Potential for Counterfeit or Low-Quality Replacements** When purchasing used or refurbished motors, there is a risk of **counterfeit or poorly repaired units**. Always buy from **authorized dealers** to ensure authenticity.

---

The **Magnetek 6-355802-01 (7.5 HP, 1800 RPM, 230/460V, 3-Phase)** is a **well-suited, reliable motor** for **medium-duty industrial and commercial applications** where **durability, standard compatibility, and efficiency** are priorities. It strikes a balance between **performance and cost**, making it a **practical choice** for HVAC, pumps, conveyors, and similar systems.

- **High-speed or high-torque applications** (requires a different motor).

- **Facilities without three-phase power** (unless a phase converter is used, which is inefficient).

- **Budget-sensitive buyers** who can find equally reliable but cheaper alternatives (though at the risk of shorter lifespan).

- **Applications requiring extreme environmental protection** (e.g., NEMA 4X or IP66 enclosures).

If the motor fits the **application requirements, electrical infrastructure, and budget**, it is a **solid, long-term investment**. If there are **specific efficiency, speed, or environmental needs**, alternatives (e.g., **VFD-compatible motors, energy-efficient models, or custom-built units**) may be worth considering.

---

You need a **reliable, standard industrial motor** for **HVAC, pumps, conveyors, or light-duty compressors**.

Your facility has **three-phase power (230V or 460V)**.

You prioritize **brand reliability and warranty support** over the absolute lowest price.

The motor **dimensionally and electrically matches** your existing system.

You are prepared for **proper installation, maintenance, and cooling**.

You need **higher efficiency** (look for **IE3 or IE4 motors** or **VFD-compatible models**).

Your application requires **variable speed control** (consider a **VFD motor combo**).

The motor is **too large or small** for your load (check **torque and current draw**).

You are in a **harsh environment** (explosion-proof, high-dust, or high-vibration settings may require a **specialized enclosure**).

Budget is extremely tight (compare with **reputable generic brands** like **Leeson, Baldor, or ABB** for cost savings).

For **most standard industrial applications**, the **Magnetek 6-355802-01 is an excellent choice** due to its **reliability, compatibility, and performance**. Ensure proper **sizing, installation, and maintenance** to maximize its **15 25-year lifespan**. If your needs extend beyond standard operation (e.g., variable speed, extreme conditions), explore **specialized alternatives** before purchasing.

Details:

MagneTek Motor Part #: 6-355802-01 7.5 HP 1755 RPM 230/460 V 19.2/9.6 A 3Ph 60 Hz Dims: 16 x 14 Weighs: 135 LBS Used Lock: AB11-8496 / AB39O1.

part #: 635580201 price

• $250.00

specifications oelemot:

• brand: Magnetek
• mpn: 6-355802-01
• part type: 5hp Motor

payments oelemot:

• wallet: Google-pay
• credit card: Discover
• other

general oelemot:

• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors
• condition: Used

offer oelemot:

• quantity: 1
• started: April 24, 2026
• options: Ship-to-home
• sold: 0
• availability: In Stock

shipping oelemot:

returns oelemot:

• method: Money back
• policy: Returns Accepted
• paid by: Seller
• time: 30 Days

seller oelemot:

• rating: 100.0%
• city: Minneapolis, Minnesota
• # reviews: 10410

Magnetek 6-355802-01 Is Similar To:

• 10-142715-03 Magnetek Century Ac Motor Hp Rpm (33.9% similar) 5 hp, 1725 rpm, est dims: 10X12X10. Magnetek century ac motor 1/2 hp v 1725 rpm Sn: E44549 electrical: 200-460V, 60HZ...(February 18th, 2019)
• 113 Magnetek Electric Motor Model (32.1% similar) Magnetek perm split capacitor electric motor stock 113, model HE3F153N', sear. Thermally protected, ins cl b, ABM 60C TB246. 95A, 1075 rpm, 208-230VAC, 3 speeds, cap 5MFD370VAC, bearings sleeve, rotation dbl, duty cont. 40M65807A, hp...(October 14th, 2017)
• 22353900 Magnetek Variable Speed Dc Motor (26.3% similar) Technical questions:if your question is of a nature or deals with compatibility IE. Inches package length : 12. If an item contains a battery, the battery is sold as-is, even itself guaranteed against DOA. Inches package width : 12. Item condition: for parts or not working tech notes: power ...(May 13th, 2018)
• 309 Magnetek New Hp Blower Motor Stock Model (30.8% similar) New surplus Magnetek blower motor stock: 309 model CA3J686N hp: 1/1 0 rpm: 850 volts : 230 phase...(August 5th, 2018)
• 36 Magnetek Motor 1-40 Hp (40.8% similar) 92 amp, Case rotation, thermally protected, single speed shaft 1/4 x open box item tested and functional see pictures. Magnetek universal electric motor stock number horse, 115V, 3000 rpm...(December 26th, 2017)
• 378 Magnnatek Magnetek Electric Motor (27.3% similar) Magnate JA2M149K 2SP 70HP 1550 rpm new, truck stock. See pics for info on motor...(November 30th, 2017)
• 448 Magnetek New Hp Speed Double Shaft Blower Motor Stock Model (26.5% similar) New surplus Magnetek 3 speed double shaft blower motor stock: 448 model HE3H110N hp: rpm: 1075 volts : 277...(August 5th, 2018)
• 46405372143-oa Magnetek Hp Dc Motor Rpm New (34.5% similar) Part: 46405372143-OA prices...(October 18th, 2018)
• 496 Magnetek New Hp Blower Motor Stock Model (30.8% similar) New Magnetek 1/5 0 hp blower motor, stock 496, model JA1M119 see picture of nameplate for further specifications. Item is in original packaging. The box may be worn from sitting on shelf. Opened for pictures only. Shipping within the continental us only...(December 4th, 2018)
• 522 Magnetek Speed Hp Double Shaft Blower Motor Stock (25.4% similar) You are buying one: new double shaft blower motor Magnetek HA3D0051N stock 522 ,115V 3 speed 1/6 HP,1 2 hp, 15 HP1050 rpm amps 4SHAFT: 2-3 4 x 1/2 cross ref:fiasco D1010PACKARD no box, motor only...(March 31st, 2018)
• 5ksp29fk2362s Magnetek Motor 1530 Rpm (36.4% similar) Permanent split capacitor. Stock import charges are on the onus of buyer rpm. Magnetek motor. 5KSP29FK2362S. Old stock as is...(December 4th, 2017)