1. Motors For Automation Drives Motion Control Sale
  2. sku: 21445667000428751
  3. ELECTRIC 4995479

GENERAL ELECTRIC 4995479 Antique Induction Motor 3HP 3PH 220V

4995479 General Electric Beautiful Antique Early 1900 S Induction Motor 3hp 3ph 220v

( Brand: General Electric ), ( Manufacturer Part Number: 4995479 ), ( Part Type: Motor ), ( Full Load Amps: 7.76 ), ( Ac Frequency Rating: 60 Hz ), ( Base Rpm: 1800 ), ( Ac Motor Type: Induction ), ( Mounting Type: Base-mounted ), ( Current Type: Ac ), ( Nominal Rated Input Voltage: 220 V ), ( Ac Phase: Three Phase ), ( Country Of Origin: United States )

Review GENERAL ELECTRIC Beautiful Antique Early Induction Motor 3hp 3ph 220v

The **General Electric 4995479 Antique 1900s Induction Motor (3HP, 3-Phase, 220V)** is a remarkable relic of early 20th-century engineering, embodying the ingenuity and craftsmanship of the industrial revolution s golden age. Dating back to the dawn of the 1900s, this motor represents a rare and highly sought-after piece of vintage electrical machinery, reflecting the foundational advancements that powered the mechanized world of the era. Crafted with meticulous precision, its robust construction features a sturdy cast iron housing, a hallmark of durability designed to withstand the demands of early industrial applications. The motor s three-phase induction design, operating at 220 volts, showcases the technological sophistication of the time, allowing it to deliver a consistent 3 horsepower output with remarkable efficiency for its era.

Visually, the motor exudes an air of historical charm, with its classic, utilitarian aesthetic clean lines, minimalist labeling, and a sturdy, almost artisanal build that speaks to the simplicity and reliability of early electric motors. The brass or bronze-colored terminals and the weathered yet functional nameplate bearing the iconic **General Electric** insignia serve as a testament to the brand s legacy of innovation. Inside, the motor s internal components, including the laminated iron core, copper windings, and robust rotor assembly, are designed to operate with minimal maintenance, a feature that underscored GE s commitment to longevity and performance. Though over a century old, this motor retains its functional integrity, offering a fascinating glimpse into the mechanical and electrical principles that laid the groundwork for modern industry.

Beyond its historical significance, the **GE 4995479** is a prized collector s item for enthusiasts of vintage machinery, industrial historians, and electrical engineers alike. Its inclusion in a museum exhibit or a private collection would not only highlight the evolution of motor technology but also serve as a tangible connection to the era when electricity began to transform society. For those seeking to restore or repurpose it, the motor s robust build and proven design make it a fascinating project, though it may require careful inspection and, in some cases, professional restoration to ensure safe and efficient operation. Whether admired for its historical value, technical intrigue, or sheer mechanical beauty, this **1900s GE induction motor** stands as a timeless symbol of human ingenuity and the relentless march of progress.

### **Pros and Cons of Buying a General Electric 4995479 Antique 1900s Induction Motor (3HP, 3-Phase, 220V)**

#### **Pros:**

1. **Historical and Collectible Value** As a rare, early 20th-century GE motor, it may hold value for collectors of vintage industrial equipment. Some antique motors are sought after for restoration projects, museums, or as conversation pieces.

2. **Potential for Restoration and Customization** If the motor is in poor condition, restoring it could be a rewarding DIY project. Some enthusiasts enjoy refurbishing antique machinery, which can be both educational and satisfying.

3. **Unique Aesthetic Appeal** The motor s vintage design may appeal to those who appreciate early industrial engineering. It could be used in a workshop, garage, or as part of a themed display.

4. **Possible Mechanical Challenges as a Learning Tool** Working on an old motor can provide hands-on experience with pre-modern electrical and mechanical systems, which may be useful for hobbyists or students of engineering.

5. **Low Initial Cost (If Available Cheaply)** Antique motors are often sold at a fraction of the cost of new motors, making them attractive for budget-conscious buyers who are willing to take on repair risks.

---

#### **Cons:**

1. **Likely High Repair and Replacement Costs** Motors from the early 1900s were built with different materials and tolerances than modern ones. Finding compatible parts (bearings, windings, seals) may be difficult or expensive. Rewinding the stator could cost hundreds of dollars, and bearings may need specialized machining.

2. **Unreliable Performance and Efficiency** Old motors often suffer from worn bearings, degraded insulation, and inefficient windings. They may run hotter, draw more current, or fail prematurely compared to modern equivalents. Efficiency ratings will be far below contemporary standards.

3. **Compatibility Issues** Modern electrical systems, variable frequency drives (VFDs), and control panels may not be compatible with an old motor. Voltage fluctuations, harmonic distortions, or mechanical mismatches could cause problems.

4. **Safety Concerns** Insulation materials from the early 1900s may degrade over time, increasing the risk of short circuits or fires. The motor may also lack modern safety features like thermal protection or proper grounding.

5. **Limited Lifespan After Restoration** Even if restored, an antique motor may not last as long as a new one. The wear on internal components (rotor bars, bearings, shaft) means it could fail sooner than expected.

6. **Difficulty in Testing and Diagnosing** Modern diagnostic tools (like motor analyzers or thermal imaging) may not work well with an old motor. Troubleshooting issues could require extensive disassembly and expertise.

7. **Legal and Liability Risks** If used in a commercial or industrial setting, liability issues could arise if the motor fails and causes damage. Insurance may not cover antique equipment as easily as modern machinery.

8. **No Warranty or Support** Unlike new motors, there is no manufacturer warranty or technical support. Any problems would be entirely the owner s responsibility.

---

### **Conclusion:**

Buying this antique GE motor is a decision that hinges on whether you prioritize **historical value, personal interest, or potential project work** over **practical functionality and reliability**. If you are an experienced mechanic, collector, or hobbyist willing to invest significant time and money into restoration, it could be a unique and rewarding purchase. However, if you need a **reliable, efficient, and low-maintenance motor** for industrial or commercial use, a modern replacement would be far superior in performance, safety, and longevity.

### **Recommendation:**

- **Buy only if:** You have a clear plan for restoration, access to specialized tools/parts, and are prepared for potential failures. Consider it as a **collectible or educational project** rather than a functional workhorse.

- **Avoid if:** You require a motor for critical applications where reliability and efficiency are non-negotiable. In that case, a **modern 3HP, 220V, 3-phase induction motor** (e.g., from WEG, ABB, or TECO) would be a far better investment.

- **Alternative Approach:** If you simply need a vintage look for display purposes, consider a **replica or a newer motor with a retro-style casing** to avoid the risks of an actual antique motor.

Ultimately, this motor is best suited for enthusiasts rather than practical use. Always weigh the emotional and sentimental value against the very real technical and financial challenges.

Details:

Approximately 126lbs It is dirty. Working when removed from service.

part #: 4995479 price

  • $850.00

specifications oelemot:

  • brand: General Electric
  • mpn: 4995479
  • part type: Motor
  • full load amps: 7.76
  • ac frequency rating: 60 Hz
  • base rpm: 1800
  • ac motor type: Induction
  • mounting type: Base-mounted
  • current type: Ac
  • nominal rated input voltage: 220 V
  • ac phase: Three Phase
  • country of origin: United States

offer oelemot:

  • sold: 0
  • options: Ship-to-home
  • availability: In Stock
  • started: April 10, 2026
  • best offers: True
  • quantity: 1

returns oelemot:

  • policy: Returns Accepted
  • time: 30 Days
  • paid by: Seller
  • method: Money back

shipping oelemot:

  • cost: $199.82
  • service: UPS Ground, FedEx Ground / FedEx Home Delivery
  • class: Standard
  • type: Calculated
  • transit: 3-6 Days
  • carrier: UPS, FedEx

seller oelemot:

  • rating: 100.0%
  • # reviews: 235
  • city: Waterford, Wisconsin

payments oelemot:

  • credit card: Diners-club
  • other
  • wallet: Google-pay

general oelemot:

  • Industrial Automation Motion Controls > Electric Motors > General Purpose Motors
  • condition: Used
part type: motor, full load amps: 7.76, ac frequency rating: 60 hz, base rpm: 1800, ac motor type: induction, mounting type: base-mounted, current type: ac, nominal rated input voltage: 220 v, ac phase: three phase, country of origin: united states,
category: business & industrial > industrial automation motion controls > electric > general purpose, sku: 21445667000428751,
General Electric 4995479 Is Similar To:
oelemot logo
1 offer $850.00 USD
  • Used. Offer #1 priced at $850.00 + $199.82 shipping estimate = $1049.82* total. Approximately 126lbs It is dirty. Working when removed from service.+$199.82 shipping

Copyright © oelemot.com