1. Motors For Automation Drives Motion Control Sale
  2. sku: 22273161033953722
  3. ORIENTAL 41K22AA-SH

ORIENTAL MOTOR 41K22AA-SH Induction

41k22aa-sh Oriental Motor Induction

( Brand: Oriental Motor ), ( Manufacturer Part Number: 41K22AA-SH ), ( Part Type: Motor )

Review ORIENTAL MOTOR Induction

The **Oriental Motor 41K22AA-SH Induction Motor** is a high-performance, compact, and versatile electric motor designed to deliver reliable, efficient, and precise motion control in a wide range of industrial and automation applications. Engineered with Oriental Motor s signature precision and durability, this **1-phase, 24V AC induction motor** combines a robust yet lightweight construction with advanced engineering to provide seamless integration into motion control systems. The **41K22AA-SH** features a **22mm diameter shaft** and a **41mm outer diameter**, making it ideal for applications where space is a constraint, such as in robotics, CNC machines, medical devices, or automated assembly lines. Its **low inertia design** ensures rapid acceleration and deceleration, reducing energy consumption and minimizing mechanical stress on connected components, while the **high torque-to-size ratio** delivers consistent performance even under varying load conditions.

This motor is equipped with a **high-efficiency, permanent magnet synchronous (PMS) or induction design** (depending on the variant), optimized for smooth operation and minimal heat generation, which extends the motor s operational lifespan. The **SH series** designation indicates a **shorted rotor induction motor**, offering a balance between cost-effectiveness and performance, making it suitable for applications requiring moderate speed control without the need for complex feedback systems. The motor s **low noise and vibration levels** contribute to a quieter operational environment, while its **IP40 protection rating** ensures basic protection against dust and accidental contact, though it is not designed for harsh or corrosive environments without additional sealing.

The **41K22AA-SH** is compatible with Oriental Motor s **wide range of motion controllers**, including the **KSM series** and **KSM-SH** servo drives, allowing for precise speed and position control via analog or digital signals. Its **standard mounting options**, such as keyed or key-less shafts and various flange configurations, simplify installation and alignment, reducing setup time and potential mechanical misalignment issues. Whether used in **linear motion systems, conveyor belts, valve actuators, or precision positioning applications**, this motor provides a dependable and cost-efficient solution for automating repetitive or high-precision tasks.

For applications requiring even greater performance, the **41K22AA-SH** can be paired with Oriental Motor s **gearheads, encoders, or feedback devices** to enhance torque output, reduce speed, or improve positional accuracy. Its **compact yet robust build** ensures it can withstand continuous operation under moderate loads, while its **low maintenance requirements** thanks to sealed bearings and a durable stator winding reduce downtime and operational costs. Overall, the **Oriental Motor 41K22AA-SH Induction Motor** represents a well-engineered, reliable, and space-efficient solution for engineers and designers seeking a balance between performance, cost, and ease of integration in motion control applications.

**Pros and Cons of buying a Oriental Motor 41K22AA-SH Induction Motor**

The Oriental Motor 41K22AA-SH is a 1/4 horsepower, 120V AC induction motor commonly used in applications like small appliances, HVAC systems, and industrial machinery. Below is a detailed breakdown of its advantages and disadvantages.

### **Pros**

1. **Reliability and Durability**

The Oriental Motor brand is well-regarded for producing robust, long-lasting motors. The 41K22AA-SH is designed for continuous operation, making it suitable for applications requiring consistent performance over extended periods.

2. **Compact and Lightweight Design**

This motor is relatively small and lightweight for its power output, which makes it ideal for space-constrained applications. Its compact size also simplifies installation in tight mechanical setups.

3. **Energy Efficiency**

Induction motors like this one are generally energy-efficient compared to older motor technologies. The 41K22AA-SH operates at a reasonable efficiency level for its class, helping reduce operational costs over time.

4. **Wide Compatibility**

It is designed to work with standard 120V AC power supplies, making it easy to integrate into existing electrical systems. The motor s shaft configuration (e.g., hollow or solid) is also commonly compatible with standard couplings and belts.

5. **Low Maintenance Requirements**

Induction motors typically require minimal maintenance compared to brushed DC motors or motors with complex electronic controls. The 41K22AA-SH has no brushes or frequent wear points, reducing the need for regular upkeep.

6. **Cost-Effective for Small Applications**

For low-power applications (such as fans, pumps, or small conveyors), this motor offers a balance between performance and affordability. It is often cheaper to purchase and operate than larger or more specialized motors.

7. **Good Thermal Management**

The motor is designed with adequate cooling fins or ventilation to dissipate heat efficiently, which helps prevent overheating during prolonged use.

8. **Availability of Replacement Parts**

As a widely used motor, replacement parts (such as bearings, seals, or windings) are relatively easy to source, extending the motor s lifespan if repairs are needed.

---

### **Cons**

1. **Limited Power Output**

As a 1/4 HP motor, it is not suitable for high-torque or high-load applications. If the intended use requires significantly more power, this motor may struggle or fail prematurely.

2. **Fixed Speed Operation**

Induction motors like this one typically run at a fixed speed determined by the supply frequency (e.g., 60Hz in the U.S.). Unlike variable frequency drive (VFD)-controlled motors, it cannot adjust speed dynamically, which may limit its use in applications requiring variable speed control.

3. **Sensitivity to Voltage Fluctuations**

Induction motors can be sensitive to voltage variations. If the power supply experiences frequent drops or spikes, the motor may overheat, draw excessive current, or fail prematurely. A voltage regulator or stabilizer may be necessary in unstable electrical environments.

4. **No Built-In Protection Features**

Unlike some higher-end motors, the 41K22AA-SH lacks built-in protection features such as thermal overload protection or current limiting. Users must rely on external circuit breakers or relays to safeguard the motor from faults.

5. **Noise and Vibration**

While generally quiet for its size, induction motors can produce some noise and vibration, especially if the load is misaligned or the motor is not properly mounted. This may be a concern in applications requiring silent operation (e.g., residential HVAC systems).

6. **Limited Lifespan Under Heavy Loads**

If operated continuously at or near its maximum capacity, the motor may experience accelerated wear on components like bearings and windings, reducing its overall lifespan.

7. **Requires Proper Enclosure for Specific Environments**

The standard enclosure (likely open or drip-proof) may not be suitable for harsh environments such as high humidity, dust, or corrosive atmospheres. A more robust enclosure (e.g., NEMA 4 or IP65) would be needed for such conditions, adding to the cost.

8. **Dependence on External Controls**

For applications requiring precise speed or torque control, additional components like VFDs, gearboxes, or mechanical governors are needed, increasing system complexity and cost.

---

### **Conclusion**

The Oriental Motor 41K22AA-SH is a practical and reliable choice for low-to-medium power applications where space, cost, and simplicity are priorities. Its strengths lie in its durability, compact design, and ease of integration into standard electrical systems. However, it is not ideal for high-torque, variable-speed, or harsh-environment applications. Users should carefully assess their specific requirements such as load demands, power stability, and environmental conditions to determine if this motor meets their needs.

### **Recommendation**

- **Buy the 41K22AA-SH if:**

- You need a small, reliable motor for low-power applications (e.g., fans, small pumps, conveyors).

- Your application does not require variable speed control.

- The electrical environment is stable (consistent voltage and frequency).

- You can accommodate minor noise and vibration without issues.

- Budget and simplicity are key factors in your decision.

- **Consider alternatives if:**

- Your application requires higher torque or power output (e.g., > 1/4 HP).

- Variable speed control is necessary (in which case a VFD-compatible motor or a DC motor may be better).

- The motor will operate in extreme environments (e.g., high dust, moisture, or temperature).

- You need built-in protection features or longer warranties (higher-end motors may offer these).

- Noise reduction is critical (a quieter motor or additional sound-dampening measures may be required).

For most general-purpose, low-load applications, the 41K22AA-SH is a solid and cost-effective choice. However, always verify compatibility with your specific system and consult with an electrician or motor specialist if unsure.

Details:

See pictures see.

part #: 41k22aa price

  • $60.00

specifications oelemot:

  • brand: Oriental Motor
  • mpn: 41k22aa-sh
  • part type: Motor

payments oelemot:

  • other
  • wallet: Apple-pay
  • credit card: Discover

returns oelemot:

  • method: Money back
  • time: 30 Days
  • paid by: Buyer
  • policy: Returns Accepted

general oelemot:

  • Industrial Automation Motion Controls > Electric Motors > General Purpose Motors
  • condition: Used

offer oelemot:

  • sold: 0
  • options: Ship-to-home
  • quantity: 1
  • availability: In Stock
  • started: May 26, 2026

shipping oelemot:

  • service: USPS Ground Advantage
  • transit: 3-7 Days
  • carrier: USPS
  • class: Standard
  • cost: $12.25
  • type: Fixed

seller oelemot:

  • city: Cincinnati, Ohio
  • rating: 100.0%
  • # reviews: 1846
part type: motor,
category: business & industrial > industrial automation motion controls > electric > general purpose, sku: 22273161033953722,
Oriental Motor 41K22AA Is Similar To:
oelemot logo
1 offer $60.00 USD
  • Used. Offer #1 priced at $60.00 + $12.25 shipping estimate = $72.25* total. see pictures.+$12.25 shipping

Copyright © oelemot.com