BURKS PUMPS 3250G9-2 Motor Rpm Frame Pumps/ DJ20E1DM 20HP 3535 254JM

( Brand: Burks Pumps ), ( Manufacturer Part Number: 3250G9-2 ), ( Part Type: Motor Frame )

Review BURKS PUMPS Pumps/ Us Motor 20hp Rpm Frame

The **Burke Pumps 3250G9-2 Pump with DJ20E1DM 20 HP Motor (3535 RPM, Frame 254JM)** is a robust, high-performance centrifugal pump engineered for demanding industrial applications requiring reliable fluid handling, efficient energy transfer, and long-term durability. Part of Burke s renowned **3250 Series**, this pump is designed to excel in a wide range of processes, including water transfer, wastewater treatment, chemical processing, mining, and agricultural irrigation, where consistent performance under heavy loads is critical. The **3250G9-2** features a **close-coupled configuration**, integrating seamlessly with the **DJ20E1DM 20 horsepower electric motor**, which delivers a robust **3535 RPM** output, ensuring optimal flow rates and pressure capabilities for medium to large-scale operations. The motor is built on a **NEMA Frame 254JM**, a standard that guarantees compatibility with a broad spectrum of industrial control systems and mechanical couplings, while its **20 HP rating** provides the necessary torque for handling viscous fluids, abrasive slurries, or high-volume discharges with minimal energy loss.

This pump is constructed with **cast iron components**, including a **volute casing** and **impeller**, which offer superior resistance to corrosion, wear, and mechanical stress, extending the equipment s operational lifespan even in harsh environments. The **3250G9-2** incorporates a **single-stage, end-suction design**, simplifying installation and maintenance while maintaining high efficiency. Its **mechanical seal assembly** (standard or optional cartridge seal) ensures leak-free performance, reducing downtime and environmental contamination, particularly in applications involving toxic or hazardous fluids. The pump s **shaft alignment** is meticulously engineered to minimize vibration, enhancing both operational stability and the longevity of the motor and bearings. For added flexibility, the **DJ20E1DM motor** is equipped with a **standard NEMA premium efficiency rating**, reducing energy consumption and operational costs over time, while its **explosion-proof or weather-resistant variants** (available upon specification) make it suitable for use in classified or outdoor settings.

Ideal for industries prioritizing **scalability and adaptability**, the **Burke 3250G9-2** can be easily integrated into larger pumping systems through its **standard flange connections** (typically 4" to 8" sizes, depending on configuration) and **adjustable discharge angles**, allowing for versatile piping layouts. The pump s **hydraulic performance curve** is optimized for a **head range of up to 150 feet** (varies by fluid density and viscosity), making it capable of handling a diverse range of applications, from clear water transfer to moderately abrasive slurries. Maintenance is streamlined thanks to the **modular design**, which allows for quick access to wear components such as the impeller, shaft sleeves, and mechanical seals without requiring extensive disassembly. Burke s reputation for **precision engineering** ensures that every component from the **precision-ground shaft** to the **balanced impeller** is manufactured to exacting tolerances, reducing the risk of premature failure and ensuring peak efficiency throughout the pump s service life.

Whether deployed in **municipal water treatment plants, industrial cooling systems, or agricultural irrigation networks**, the **Burke 3250G9-2 with DJ20E1DM motor** represents a **high-value investment** in reliable, high-performance fluid management. Its **durability, energy efficiency, and ease of maintenance** make it a preferred choice for engineers and operators seeking a pump that balances **power, precision, and longevity** delivering consistent performance in even the most demanding applications. With Burke s **proven track record of innovation and quality**, this pump stands as a testament to industrial-grade reliability, ensuring that operations remain uninterrupted while meeting the highest standards of efficiency and safety.

### Pros and Cons of buying a Burkert 3250G9-2 Pump with DJ20E1DM Motor (20HP, 3535 RPM, Frame 254JM)

The Burkert 3250G9-2 is a centrifugal pump designed for industrial applications, offering reliable fluid handling with minimal energy loss. Its 20HP motor provides substantial power, making it suitable for demanding processes such as chemical transfer, water supply, or wastewater treatment.

Burkert is a well-established brand known for manufacturing robust, long-lasting pumps. The 3250G9-2 is likely constructed with materials resistant to corrosion, wear, and high-pressure conditions, ensuring extended operational life, especially if the application involves harsh chemicals or abrasive fluids.

This pump is likely designed to handle a wide range of fluids, including water, oils, acids, bases, and other corrosive or abrasive liquids, depending on the material of construction (e.g., stainless steel, cast iron, or other alloys). The 254JM frame motor is a standard industrial motor, offering flexibility in system integration.

A 20HP motor is relatively efficient for its power class, and Burkert pumps are often engineered to minimize energy consumption while maintaining performance. This can lead to lower operational costs over time.

Industrial pumps like this typically feature modular designs, making maintenance tasks such as bearing replacement, seal servicing, or impeller inspection more manageable. Regular maintenance can prolong the pump s lifespan and prevent costly downtime.

- Industrial process fluid transfer

- Water supply or irrigation systems

- Chemical processing

- HVAC systems

- Wastewater treatment (depending on fluid compatibility)

Burkert is a reputable brand with a global presence, meaning parts, service manuals, and technical support are likely readily available. This reduces the risk of prolonged downtime due to unavailability of replacements.

Industrial pumps are often designed to minimize operational noise and vibration, contributing to a safer and more stable working environment.

---

A 20HP pump with a dedicated motor is a significant investment. The Burkert 3250G9-2, combined with the DJ20E1DM motor, may cost several thousand dollars, depending on material, customization, and supplier pricing. This could be a barrier for small businesses or startups with limited budgets.

While the pump is efficient, a 20HP motor consumes a substantial amount of electricity. For facilities with high energy costs or those operating continuously, the long-term energy expenses could be notable.

A 20HP motor and large centrifugal pump occupy significant space. Installation may require dedicated space in the facility, potentially limiting layout flexibility.

Industrial pumps require proper alignment, sealing, and electrical connections. Installation may necessitate specialized labor, adding to the overall cost. Improper installation can lead to inefficiencies, reduced lifespan, or failure.

While the pump is durable, routine maintenance (e.g., lubrication, seal replacement, impeller inspection) and potential repairs can incur ongoing expenses. For example, mechanical seals or bearings may need periodic replacement, depending on usage and fluid conditions.

If the application does not require the full 20HP capacity, the pump may be oversized, leading to higher operational costs without proportional benefits. Smaller pumps (e.g., 10HP or 15HP) might suffice for less demanding tasks, reducing upfront and energy costs.

The pump s suitability depends on the material of construction (e.g., stainless steel, cast iron, or other alloys). If the fluid is highly corrosive or abrasive, the pump may require specialized materials, increasing cost. Mismatched materials can lead to premature wear or failure.

While industrial pumps are designed to minimize noise and vibration, they may still produce noticeable levels in quiet or sensitive environments (e.g., laboratories, residential areas). This could require additional soundproofing or vibration dampening measures.

Purchasing from a distributor or supplier may introduce risks such as long lead times, limited warranty coverage, or difficulty finding authorized service providers. Always verify warranty terms and supplier reliability before purchase.

Operating and maintaining an industrial pump requires trained personnel. If the facility lacks expertise, additional training may be necessary, adding to operational overhead.

---

The Burkert 3250G9-2 pump paired with the DJ20E1DM 20HP motor is a robust, high-performance solution for industrial fluid handling applications. Its strengths lie in durability, efficiency, versatility, and compatibility with a wide range of fluids. However, the high upfront cost, energy consumption, and maintenance requirements must be carefully considered. This unit is best suited for facilities with demanding fluid transfer needs, sufficient space, and the resources to support its operation and maintenance.

For smaller-scale or less demanding applications, a lower horsepower pump (e.g., 10HP or 15HP) might be a more cost-effective alternative. Conversely, if the application involves highly corrosive or abrasive fluids, ensuring the pump s material compatibility is critical to avoid premature failure.

---

- Determine the exact flow rate, head pressure, and fluid properties (viscosity, corrosiveness, temperature) required for your application. This will help confirm whether the 20HP pump is necessary or if a smaller unit would suffice.

- Calculate the total cost of ownership, including energy consumption, maintenance, and potential downtime costs, over the pump s expected lifespan.

- Confirm that the pump s material (e.g., stainless steel, cast iron) is compatible with the fluids it will handle. Burkert may offer custom materials or coatings for specific applications.

- Purchase from an authorized Burkert distributor or dealer to ensure genuine parts and reliable after-sales support. Review warranty terms to understand coverage for the pump and motor.

- Allocate funds for professional installation to ensure optimal performance and longevity. Plan for regular maintenance, including lubrication, seal replacement, and impeller inspections, to prevent costly failures.

- If energy costs are a concern, explore options such as variable frequency drives (VFDs) to adjust motor speed based on demand, potentially reducing energy consumption.

- Ensure that operators and maintenance staff are trained in pump operation, troubleshooting, and basic repairs to minimize downtime and extend the equipment s life.

- If the 20HP pump is overkill, consider a slightly smaller motor (e.g., 15HP) to reduce initial and operational costs while still meeting performance requirements.

- Explore other reputable brands (e.g., Grundfos, KSB, ITT Goulds) for comparable pumps, as they may offer competitive pricing or features tailored to specific needs.

The Burkert 3250G9-2 with DJ20E1DM motor is a strong choice for industrial applications requiring reliable, high-performance fluid handling. However, it is best suited for facilities with the resources to support its operation and maintenance. For smaller or less demanding applications, a more modestly sized pump may be a more economical alternative. Always conduct a thorough needs assessment and cost-benefit analysis before making a purchase.

Details:

These services include Motor was powered up working. Burks Pumps/ US Motor 3250G9-2, DJ20E1DM, 20HP, 3535 RPM, Frame:254JM Motor, Pumps Info: Cat# INLET: 2 NPT, OUTLET: 2-1/2 model # S506, 20HP. USED, Motor was powered up working. Encl-DP, Type: FD4.

3540 RPM, Frame: 254JM, 50/60 HZ, 3PH, 208-230/460V, 54-47/23 Amps. Prices for these options may differ from standard ground shipping. These services include: UPS 3 Day Select. Item is sold as pictured.

The cost of combined shipping depends on weight, location buyer and size box. UPS Next Day AM.

part #: 3250g92 prices

• $1099.99-$3799.99

specifications oelemot:

• brand: Burks Pumps
• mpn: 3250g9-2
• part type: Motor Frame

shipping oelemot:

offer oelemot:

• best offers: True
• availability: In Stock
• quantity: 1
• options: Ship-to-home
• started: May 8, 2026
• sold: 0

returns oelemot:

• paid by: Buyer
• time: 30 Days
• policy: Returns Accepted
• method: Money back

payments oelemot:

• other
• credit card: Visa
• wallet: Paypal
• money order
• check

seller oelemot:

• rating: 100.0%
• # reviews: 28700
• city: Kawkawlin, Michigan

general oelemot:

• Industrial Automation Motion Controls > Electric Motors > General Purpose Motors
• condition: Used

Burks Pumps 3250G9-2 Is Similar To:

• 350ga7-1-1-4-ab-m Burks Pumps Centrifugal Pump (30.8% similar) Manufacturer: Burks Pumps systems catalog no: 350GA7 ab-m part 38C500101 marathon electric model: LVE182TTDW7325AA m cat M1315A hp: 5/3 kw: limited warranty buyer acknowledges that the equipment is being sold as and without any of merchant ability or fitness for a particular use. Buyer may inspect ...(May 24th, 2017)
• Burks 350cs9m 5 Hp 3450 Rpm 60 Hz 3 Phase Turbine Pump With Bluffton Motor (30.3% similar) The operating temperature limits of this pump depend on the seal elastic and following limit applies for buns-n seals: 225 degrees f 107 to operate the pump raceway conducts fluid into impeller and then provides a channel for liquid to move as it is propelled energized by. Product specs: : raceway ...(August 25th, 2024)
• A.o Smith 8-187934-21 A.o Century Ac Motor Bw7-235 1 2 Hp 3450 Rpm Burks Pumps 5ct6m Untested (20.5% similar) Very rusted with discoloration, scratches, stains, etc. Shipped as is. Due to the item being sold untested, it may or not fully function once received/may require further servicing. Please see pictures for flaws...(October 29th, 2025)
• Burks Pumps M416 Pumps Marathon 375g6-2 Hp 7-1 2 Rpm 3500 Frame 184jm Motor Pump (52.3% similar) These services include: ups 3 day select. The cost of combined shipping depends on weight, location buyer and size box. Ups next day am. Prices for these options may differ from standard ground shipping. Ups 2 day air. Burks Pumps/ marathon 375G6-2, M416, HP:7-1/2, RPM:35 FRAME:184JM motor/ pump, ...(May 8th, 2026)
• Burks Pumps 3200g7a-2 Pumps Us Motor Dj20p1dm 20hp 3540 Rpm Frame 254jm (92.3% similar) Item is sold as pictured. Burks Pumps/ us motor 3200G7A-2, DJ20P1DM, 20HP, 3540 rpm, FRAME:254JM motor, Pumps info: cat# inlet: 2 not, outlet: 2-1/2 model # FR61, 20HP. Prices for these options may differ from standard ground shipping. Ups next day am. Used, motor was powered up working. The cost of...(May 8th, 2026)