1. Motors For Automation Drives Motion Control Sale
  2. sku: 22436549231550872
  3. DELTA POWER 30810000

DELTA POWER 30810000 Electric Motor Baldor 34S85-5422 1/2HP 1PH 1725RPM

34s85-5422 Delta Power 30810000 Used Electric Motor 1/2hp 1ph 1725rpm Baldor

( Brand: Delta Power ), ( Manufacturer Part Number: 30810000 ), ( Model: 34S85-5422 ), ( Part Type: Motor ), ( Ac Frequency Rating: 60 Hz ), ( Ac Phase: Single Phase ), ( Base Rpm: 1725 ), ( Country Of Origin: United States ), ( Current Type: Ac ), ( Enclosure Type: Tefc ), ( Nominal Rated Input Voltage: 115v/208v-230v ), ( Rated Load: Hp ), ( Service Factor: 1.25 )

Review DELTA POWER Used Electric Motor 1/2hp 1ph 1725rpm Baldor

The **Delta Power 30810000 Electric Motor (1/2 HP, Single-Phase, 1725 RPM, Baldor 34S85-5422)** is a robust, high-performance fractional horsepower motor designed for reliability, efficiency, and versatility in a wide range of industrial, commercial, and residential applications. Engineered under Delta s stringent quality standards with Baldor s renowned engineering expertise this motor delivers consistent performance in demanding environments where precision and durability are critical. Built with a **1/2 horsepower (0.373 kW) output**, it provides sufficient torque and speed (1725 RPM at full load) to drive a variety of mechanical systems, including small conveyors, pumps, compressors, fans, and light-duty machinery, making it an ideal choice for applications requiring steady, dependable operation without excessive energy consumption.

The motor features a **Baldor 34S85-5422 frame**, a compact yet sturdy design optimized for ease of installation and integration into existing systems. Its **single-phase, 115V/230V (depending on configuration) operation** ensures compatibility with standard electrical setups, while its **capacitor-start, capacitor-run (CSCR) or permanent split capacitor (PSC) winding options** (depending on model variant) allow for efficient starting torque and smooth, vibration-free performance. The motor s **ball-bearing construction** ensures low friction and extended operational life, reducing maintenance requirements and downtime. Additionally, its **NEMA Premium efficiency rating** or equivalent minimizes energy waste, contributing to cost savings and environmental sustainability over the motor s lifespan.

Constructed from high-grade materials, including **galvanized steel end bells and a robust shaft**, this motor is built to withstand frequent starts, continuous operation, and exposure to moderate environmental conditions. The **insulation class B (130 C rise)** provides reliable thermal protection, while the **IP54 (or higher, depending on enclosure type) rating** offers protection against dust, dirt, and splashing water, making it suitable for both indoor and lightly protected outdoor applications. The **smooth, balanced rotor** and precision-machined components reduce noise and vibration, ensuring quieter operation and longer equipment life for connected machinery.

Whether used in HVAC systems, small-scale manufacturing, agricultural equipment, or commercial appliances, the Delta Power 30810000 motor combines **proven Baldor reliability with Delta s cost-effective manufacturing**, offering an excellent balance of performance, efficiency, and affordability. Its **universal compatibility** with standard mounting brackets and electrical connections simplifies installation, while its **low-maintenance design** ensures minimal upkeep, making it a practical choice for both new installations and replacements in existing systems. With a focus on durability and efficiency, this motor is a dependable workhorse for applications where dependable, fractional horsepower performance is essential.

### **Pros and Cons of buying a Delta Power 30810000 (Baldor 34S85-5422) Electric Motor**

#### **Pros:**

1. **Reliable Brand Reputation** Delta Power (now part of Baldor) is a well-established manufacturer known for durable, high-quality industrial motors. The Baldor 34S85-5422 is a proven model with a strong track record in commercial and light industrial applications.

2. **Proper Specifications for Common Uses** The 1/2 HP, single-phase (1PH), 1725 RPM motor is well-suited for small to medium-duty applications such as:

- Small HVAC systems (fans, blowers)

- Compressors (refrigeration, air tools)

- Pumps (water circulation, irrigation)

- Conveyor systems (light-duty)

- Appliances (washing machines, dryers, power tools)

3. **Standard NEMA Frame (56C)** The NEMA 56 frame is common in the market, making it easier to find replacement parts, belts, pulleys, and mounting hardware.

4. **Efficient for Single-Phase Operation** Unlike three-phase motors, single-phase motors are more accessible for residential or small commercial setups where three-phase power may not be available.

5. **Cost-Effective for Basic Applications** Compared to higher-end or custom motors, this model offers a balance between performance and affordability for standard tasks.

6. **Compatibility with Common Voltage (115V or 230V, depending on wiring)** Most single-phase motors like this can be wired for either 115V or 230V, providing flexibility in installation.

7. **Low Maintenance Requirements** As a standard induction motor, it requires minimal upkeep (regular lubrication of bearings, tension checks on belts if used).

---

#### **Cons:** 1. **Limited Power for Heavy-Duty Work** At only 1/2 HP, this motor is not suitable for demanding applications such as:

- Large industrial machinery

- High-capacity pumps or compressors

- Continuous heavy loads (e.g., 24/7 operation without cooling breaks)

- Applications requiring frequent starts/stop cycles (may overheat)

2. **Single-Phase Limitations**

- Single-phase motors require a capacitor for starting (if not pre-wired with a start capacitor), which adds complexity.

- They are less efficient than three-phase motors for the same horsepower.

- Starting torque is weaker compared to three-phase motors, which can be an issue for applications requiring immediate high torque (e.g., lifting heavy loads).

3. **Potential for Overheating Under Load** If the motor is continuously operated near its maximum capacity or in high-temperature environments, it may overheat, reducing lifespan.

4. **Noise and Vibration** Like most standard induction motors, it may produce some noise and vibration, which could be an issue in noise-sensitive environments.

5. **Dependence on Proper Installation** Incorrect wiring, overloading, or lack of maintenance (e.g., dirty bearings) can lead to premature failure.

6. **Limited Lifespan for Extreme Conditions** Exposure to moisture, dust, or corrosive environments without proper protection (e.g., NEMA enclosure) will shorten its lifespan.

7. **No Built-In Protection Features** Unlike some premium motors, this model may lack built-in overload protection or thermal cutouts, requiring external safeguards.

---

### **Conclusion**

The **Delta Power 30810000 (Baldor 34S85-5422) 1/2 HP, 1PH, 1725 RPM motor** is a **solid, cost-effective choice for light to medium-duty single-phase applications** where reliability and standard performance are prioritized over extreme power or efficiency. It is well-suited for small HVAC systems, pumps, compressors, and basic industrial machinery where the load is manageable and the environment is controlled.

However, it is **not ideal for heavy-duty, high-torque, or continuous high-load applications**. If your use case involves frequent starts, high resistance, or extreme operating conditions, a **higher horsepower motor, three-phase motor, or a motor with built-in protection features** would be a better investment.

---

### **Recommendation**

**Buy this motor if:**

- You need a **reliable, standard single-phase motor** for **light-duty applications** (e.g., small fans, pumps, compressors).

- Your application requires **115V or 230V single-phase power**.

- You are working within the **1/2 HP capacity limits** and expect **moderate to light loads**.

- You can **ensure proper installation, maintenance, and cooling** to maximize lifespan.

**Avoid this motor if:**

- Your application demands **high starting torque or frequent heavy loads**.

- You require **three-phase power** for better efficiency and torque.

- The motor will operate in **extreme environments (high dust, moisture, or temperature)** without proper protection.

- You need **long-term heavy-duty use** (consider a 3/4 HP or 1 HP motor instead).

- You require **built-in protection features** (e.g., thermal overload relay).

**Alternatives to Consider:**

- **For higher torque/starting power:** A **three-phase motor** (e.g., Baldor 56C 1/2 HP 3PH) or a **single-phase motor with a permanent split capacitor (PSC)** for better efficiency.

- **For heavy-duty use:** A **3/4 HP or 1 HP single-phase motor** (e.g., Delta 30810001 or similar).

- **For extreme environments:** A **NEMA 4 or NEMA 12 enclosed motor** for dust/water resistance.

- **For energy efficiency:** A **premium efficiency motor** (if available in the same frame).

**Final Verdict:** This motor is a **good general-purpose choice for basic single-phase needs**, but its limitations should be carefully considered before purchase. If in doubt, consult an electrician or motor specialist to ensure it matches your specific application.

Details:

May show some shelf age, staining, dings or scratches.Delta Power 30810000 Electric Motor 1/2hp- 1ph 115V/208V-230V- 1725rpm TEFC 56CZ manufactured by Baldor for Delta 34S85-5422- output bore is slotted and measures approximately 0.25 inch x 0.56 Used-Shows Little possibly no wear / use. Missing original manufacturer packaging.

part #: 30810000 price

  • $437.50

specifications oelemot:

  • brand: Delta Power
  • mpn: 30810000
  • model: 34s85-5422
  • part type: Motor
  • ac frequency rating: 60 Hz
  • ac phase: Single Phase
  • base rpm: 1725
  • country of origin: United States
  • current type: Ac
  • enclosure type: Tefc
  • nominal rated input voltage: 115v/208v-230v
  • rated load: Hp
  • service factor: 1.25

seller oelemot:

  • city: Hudsonville, Michigan
  • rating: 100.0%
  • # reviews: 28817

general oelemot:

  • Industrial Automation Motion Controls > Electric Motors > General Purpose Motors
  • condition: Used

shipping oelemot:

  • class: Standard
  • transit: 2-6 Days
  • service: UPS Ground
  • type: Calculated
  • carrier: UPS
  • cost: $54.80

offer oelemot:

  • sold: 0
  • availability: In Stock
  • quantity: 1
  • options: Ship-to-home
  • started: June 4, 2026

returns oelemot:

  • time: 30 Days
  • method: Money back
  • policy: Returns Accepted
  • paid by: Buyer

payments oelemot:

  • wallet: Paypal
  • other
  • credit card: Discover
part type: motor, ac frequency rating: 60 hz, ac phase: single phase, base rpm: 1725, country of origin: united states, current type: ac, enclosure type: tefc, nominal rated input voltage: 115v/208v-230v, rated load: hp, service factor: 1.25,
category: business & industrial > industrial automation motion controls > electric > general purpose, sku: 22436549231550872,
Delta Power 30810000 Is Similar To:
oelemot logo
1 offer $437.50 USD
  • Used. Offer #1 priced at $437.50 + $54.80 shipping estimate = $492.30* total. Delta Power Electric Motor - 1/2hp - 1ph - 115V/208V-230V - 1725rpm - TEFC 56CZ - manufactured by Baldor for Delta - - output bore is slotted and measures approximately 0.25 inch x 0.56 inch Used-Shows Little or possibly no wear / use.+$54.80 shipping

Copyright © oelemot.com